INDUSTRY NEWS
OLIMPIA 80 tube mill installation for South American manufacturer
has been put into operation in South America in a plant of one of the biggest Argentinian tube manufacturers. The complete tube mill
O
including packaging line, can produce round tube in a OD range from 35 mm up to 139 mm (5 ½”), square sections from 40x40 mm up to 100x100 mm in a thickness range from 1.5 up to 6.5 mm. The max mill speed is 120 m/min.
6 IMT June 2015
ne new and complete OLIMPIA 80 tube mill for carbon steel structural sections
All the stands in break down,
fin-pass and sizing sections are individually motorized, in order to equilibrate the used power and better control the torque in every passage, consequentially reducing the rolls wear. The line is equipped with a Quick Roll Change System by cassette, removable by crane. This system reduce drastically the timing of the production changeover.
Five similar lines are in
manufacturing in our factory, with the final destinations Central
Asia and Far East markets; every our customer appreciate the innovations in our technology and our availability to discuss and customize the solutions to solve the productions problems. In the same time, we installed
even other two complete tube mills with our patented LINEAR CAGE FORMING TECHNOLOGY for square and rectangular section in Turkey, one of our best market in the last years. The Cage Forming Technology,
both for square and rectangular and for round sections,
www.internationalmetaltube.com
represented a very importunate percentage of our productions, for carbon steel and even for stainless steel tubes. Olimpia 80 every year invest
a lot in innovation technologies, adding more sophisticated solutions but even simple and complete lines to guarantee the same quality result reducing the investment costs. With this policy, more customers can appreciate our technologies and can have more opportunity to choose in a very wide range of solutions.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40