PRODUCTS & EQUIPMENT
New compact and economic diameter/width gauges
Zumbach Electronics introduce upgraded compact and economic diameter/width gauges for hot and cold processes.
Z
UMBACH Electronics introduces a new
upgraded product line of their ECOGAUGE systems of single axis gauges. With two new models, ECOGAUGE 160 and 550, the range of applications have been extended to a diameter of 500mm (20in.). These ECOGAUGE series are available in various sizes and are engineered for operation under severe environments in hot or in cold processes. Typical solutions are between rolling stands for bar or for strips or in conveyors, after hot extrusions, after radial forges or in peeling and grinding operations. Mounting is very flexible and possible in horizontal, in vertical or any orientation. A built in ODAC® laser gauge of latest design takes up to 2000
highly accurate measurements/ second of diameter or width/ height.
Protection and cooling are guaranteed by robust housings for the emitter and the receiver modules with a combined air purging and cooling system. Additional water cooling for extreme conditions is possible. Maintenance is minimal and the availability is excellent. The measured data can be
provided to a user defined output or to Zumbach’s USYS or STEELMASTER data acquisition,
Key Data
Measuring field: Max. product size: Max. temperature: Max. speed:
Measurement rate: Accuracy:
Up to 550mm (21.7in.) Approx. 500mm (20in.) 1200°C (2192°F) Unlimited
1000/s or optionally 2000/s Up to +/- 0.001mm (.00004in.)
Violi presents the new tube straightener with saw blade cut
Violi Srl is an Italian manufacturer specialized in the design and production of industrial machinery typically used in manufacturing of metal tubes, bars and wires. The company offers a wide
range of reliable and easy-to- use straightening machines for metal profiles, both circular and complex, that can be applicable to different diameters. Violi Srl has enlarged its range of straightening machines and is ready to present its latest machine for straightening and cutting tubes : the straightening machine with saw blade cut mod. VM/MRTSA. This machinery is projected in
16 IMT June 2015
dragging unit with small shaped wheels or plastic polymer rollers. The machine is provided with
an encoder in order to easy define the length of cutting and the saw blade cutting group has adjustable speed, controlled by brushless motor. If required, the machine can be also equipped with a special ejecting unit for unloading the product.
order to straighten and cut tubes with diameters from 8 up to 25 mm, and complex profiles with similar section. MRTSA is composed by a
pay-off reel, both motorized or clutch, with adjustment of the diameter of the coil and a winch for coil lifting, a double rotating group with wheels, and a
www.internationalmetaltube.com
Visit our website www.
violimacchine.it in order to discover our range of industrial machines and for more information, contact the sales department by e-mail at sales@
violimacchine.it
processing and display systems, which includes graphics, alarms, statistics, database, networking etc.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40