This page contains a Flash digital edition of a book.
Annealed Coil Packaging Line, New 1993, automatically seals, boxes, stacks, weighs, marks, and palletizes freshly annealed coils, to be sold with or without annealing furnace


PVC Coating Line ½” - 1” (12.7 - 25 mm) for straight lengths or coils PVC Coating Line for ½” - 4” (12.7 - 101 mm) for straight lengths only


60” (1524 mm) Hedley Roller Hearth Annealing Furnace, Gas-Fired, 2 Zone for level wound coils, layer wound coils or straight lengths, 3300 Lb./Hr. (1500 KG/Hr.)


48” (1220 mm) wide Roller Hearth Annealing Furnace, electric for coils or straight lengths, 1330 Lb./Hr. (600 KG/Hr.) FOUNDRY


Asarco Shaft Furnace, 10 Tons/Hr., 28 Ft., High Efficiency Melt Furnace with Pre-Heater and afterburners


Asarco Continuous Caster with 15 Ton Gas-Fired Holding Furnace, single strand vertical cast for up to 12” (305 mm) copper logs, flying saw with chip extraction, log elevator, water cooling system and moulds for 9.65” (245 mm) and 10¾” (273 mm) copper logs


Semi-Continuous Caster for twin billets or single strand slab, 20 Ton Gas-Fired Holding Furnace, for 39 Ft. (12 m) long billets of 11.8” (300 mm) dia. or slabs up to 37.4” (950 mm) wide, in-line billet/slab saw with 40” blade and 100 HP, powered exit conveyor, all fed by shaft furnace.


PLUS


Complete Die Shop for grinding, polishing and re-sizing with Die Quips, lathes, grinders, etc. Thousands of Carbide Dies & Plugs Complete Laboratory with ARL Spectrometer, Tensile Testers, Hardness Testers, etc. Saws, Scrap Choppers, Conveyors, Swagers, Push Pointers, Squeeze Pointers and MORE


For information, quotations or an inspection visit contact: John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com A Complete Copper Rod and Tube Plant


using ‘Upcast’ Technology (10734) Located in Mexico


This complete plant near Mexico City produces 4500 metric tons of copper tube and 5000 metric tons of copper rod annually. It can be purchased for relocation or with the real-estate for a turnkey start-up on site. The equipment is very modern and has seen only limited use. The building is modern and has ample spare land for expansion in a safe and clean industrial park.


The plant includes: ● Upward continuous caster for rod and tube up to 8 strands with a 5 Ton Induction Melting Furnace and a 3 Ton Induction Holding Furnace


● Two Strand Tube Pilger Mill ● 4 x 5 Ton Drawbenches ● 4 x 3 Ton Drawbenches ● “Y” Type Dong Fang 12 Stand Rod Reducing Mill ● Waterbury Farrel Model 1-T 10 Die Wire Drawer ● Cincinnati Cathode Plate Shear ● Wire Drawers, Laboratory, Pointers and a large quantity of spare refractory for the Melt Furnace and Caster


Available only as a complete plant.


A GREAT INEXPENSIVE TURNKEY OPPORTUNITY! For information, quotations or an inspection visit contact:


John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40