For productive, efficient machining many companies use solid carbide tools that are specially matched to the production process which can reliably maintain tolerances even in the micron range. In order to be able to manufacture these tools consistently, Wolf relies on Werth coordinate measuring machines. Solutions reports.
THE UK’s LEADING RANGE OF 3D MEASUREMENT, LASER SCANNING & SPC SOLUTIONS
CMM Retrofits & Upgrades Give your CMM a new lease of life with the World’s leading CMM software and controller upgrades.
Laser Scanning & Digitising Laser scanning has never been so easy - the unique range of HandyScan3D & Kreon scanners.
olf’s Mould and Tools division GmbH was
founded in 2000 Portable CMM’s
HandyPROBE & DPA - truly reliable & portable measurement at an affordable price.
SPC Software Systems
Industry standard SPC solutions for process evaluation and improvement.
Specialist 3D Inspection Solutions 3D measuring solutions including new and used CMM’s, Dynamic Measuring systems plus high accuracy, high speed Tube Measurement.
Contract Services Complete range of services including
CMM inspection, portable on site measurement & 3D laser scanning, plus calibration and service of all makes of CMM.
and is part of the Wolf Group. It started with the manufacture of tools for cutting and bending systems and then added forming, bending and punching tools to the product portfolio. Through sister company Wolf Coatings a range of coatings could be applied to the tools depending on application. Today the division positions itself broadly offering products and services ranging from 3D milling, contract eroding and the construction of bending and punching tools through to plastic injection moulds and the manufacture of prototype parts for the automotive industry. In order to facilitate further expansion, a new building was acquired in 2002 and at the same time, significant investment was made in updating production equipment. This included a Werth VideoCheck IP 3D coordinate measuring machine with multi- sensor technology which allows rapid measurement of 2D and 3D geometries. With the image processing sensor, 2D features can be captured and evaluated precisely and for measuring cylindrical shapes or undercuts, for instance, the VideoCheck IP also features a motorised, tilting mechanical probe.
Telephone. +44 (0)1733 325252
email.sales@
measurement-solutions.co.uk www.measurement-solutions.co.uk
The multi-sensor device therefore has the ability to combine various measurement methods, using direct and backlighting, tactile or laser supported processes. A 2D BestFit software package also facilitates the graphical comparison of scanned profile data against 2D CAD data. Through the use of ToleranceFit software, which allows tolerances to be taken into consideration, the machine can also be used as a modern profile projector. Horst Wolf, managing director of the Wolf Group, explains: “This kind of measurement system is a very important piece of equipment for us. The automotive industry in particular requires documented evidence that parts meet dimensional
requirements – whether they are manufactured from plastic, sheetmetal, or solid carbide. For punching dies – which are also checked using ToleranceFit software, safety is the primary concern. Also if the die doesn’t have the correct amount of clearance and the punching unit is damaged, this can escalate operating costs significantly.” Wolf’s Tooling Technology division is the strongest element of the Wolf Group, accounting for around 50% of total sales. Its speciality is special cutting tools manufactured from solid carbide – especially step drills and other multiple tools for production processes. In order to be able to produce these precision tools – which can have tolerances of ±3μm – having the appropriate measuring equipment is essential.
Based on positive experiences gained from its mould and die division, the decision makers at Wolf Tooling Technology decided on a multi-sensor coordinate measuring machine from Werth Messtechnik, Giessen - the VideoCheck V HA. The use of precision air bearings and a solid granite base has resulted in precision levels that allow measurement of tools with tolerances in the range of a few microns. Together with a maximum scale resolution of 10nm and 3D error compensation, maximum measurement errors (MPE) of up to 0.25μm can be obtained with traceability to national standards.
Additional touch trigger and measuring probe systems,
laser probes, or the patented Werth Fiber Probe (with a probe sphere diameter as small as 20μm) can be combined with the image processing sensor. The flexibility that this provides ensures that all features of various tools, such as hobs, saw mills, reamers, taps, step drills, twist drills, grinding and dressing rollers, or inserts, can be measured. Detlef Ferger, sales manager at Werth Messtechnik emphasises a special feature: “Our machines are specified on the basis of ISO 10360 and VDI/VDE 2617 which means our measurement systems are traceable to the length standard at the German National Metrology Institute. For us and our customers, this means the results are totally reliable and fully documented.” The Werth coordinate measuring machine serves as a reference machine for measurement equipment comparisons which can then be used to assign appropriate contract tolerances for a particular customer order. “In the future, tooling technology will depend not just on the micron, but on the tenth of a micron,” Horst Wolf predicts. “When I look at the increases in requirements over the last three or four years, then I look at Werth Messtechnik’s high precision tool measurement machines, it becomes obvious that this is a company with its finger on the pulse in terms of forward thinking technology and innovation.”
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60