New Products
its class. The Stencil Laser P 6060 can cut
all stencils, both framed and frameless,
and can be adjusted to fit any stencil size
up to 29.1” x 37.4” (740 x 950 mm). www.
lpkfusa.com
Slic™ stencil material narrows
performance gap
FINE LINE STENCIL claims proven
performance down to a surface area
ratio (SAR) of 0.55 with its Slic™ stencil
material. This significantly narrows the
performance gap between affordable laser-
cut and high-cost electroform technologies.
Benefits include outstanding, repeatable
paste release (down to SARs of 0.55) and
SX45 stereo zoom microscope
the board and minimizing the potential
much cleaner paste release, allowing cus-
optimizes performance, affordability
for oxidation and other negative effects of
tomers to reduce the number of times the
Vision Engineering’s new stereo zoom
extended thermal processing. www.vitronics-
stencil is cleaned during production runs.
microscope, the SX45, offers greater af-
soltec.com
www.finelinestencil.com
fordability without compromising optical
performance. With a zoom ratio of 6.3:1
Novatec offers sophisticated PCBA
‘Advanced Starter’ turnkey line
combined with x50 magnification, ex-
traceability to SMEs
targets prototyping & low-volume
tended long working distances and a large
Novatec releasd ProcessWatch™, an in-
assembly depth of field, the SX45 offers operators
novative approach to production process
The ‘Advanced Starter’ turnkey line for optimised functionality for inspection and
traceability that enables manufacturers to
SMD assemblers with limited production rework.
www.visioneng.us
trace boards and record events throughout
demands and limited equipment budgets is
the assembly process and keep track of as-
priced at under US $35,000. The line fills
mySelective 6748 ensures precise
sociated consumables, stencils and tooling.
a niche in the SMT assembly marketplace
selective soldering control
Its real time production control capabilities
for low-cost, fast-payback, high-precision
Pre-heating an assembly prior to selective
offer benefits to operators, process engi-
equipment ideal for prototyping and other
soldering is important for many assemblies
neers and quality control managers alike,
low-volume circuit board assembly.
to ensure good soldering results. Preheat-
including stencil/board/tooling compat-
www.manncorp.com/turnkey
ing must be strictly controlled so that each
ibilities, materials aging, events alerts, and
assembly reaches the specified preheat tem-
much more.
www.novatec-eap.com
Krayden and Dow Corning introduce
perature at a controlled and linear ramp
new products for LED marketplace rate. Vitronics Soltec’s mySelective 6748
Small and powerful under-board
Krayden, Inc., along with Dow Corning, offers a closed-loop preheater management
heater perfect for PCB repairs
introduces a new family of products for the feature that actively and precisely controls
The new Weller WHP200 under-board
LED marketplace. The LED marketplace board preheating dwell time and tempera-
heater from Cooper Tools is designed to
has opened up several new opportuni- ture to ensure board- to-board repeatability
speed up repair of small multilayer PCBs.
ties in automotive lighting, backlighting and optimized process control. It keeps
The WHP200 is simple to operate and of-
displays and consumer electronics. This cycle time to the minimum required to
fers easy temperature adjustment. An infra-
new family of products developed by reach the correct temperature, thus mini-
red plate provides fast, precisely controlled
Dow Corning will be replacing organics mizing overall processing /heating time for
heating, ensuring an even substrate
materials with profitability benefits. New
products include gels and encapsulants,
conformal coatings, and adhesives. www.
krayden.com
PROMATION introduces fume
extraction hood for edge conveyors
PROMATION’s new fume extraction
hood system fits over most of the com-
pany’s 1000 mm long edge conveyors, al-
lowing customers requiring a work station
after conformal coat to dry, cure, inspect
and remove fumes when performing other
functions. The hood comes with a stan-
dard 7” port for customer vacuum hook-
up. Black lights may be added to assist in
coating inspection.
www.Pro-mation-Inc.com
www.globalsmt.net Global SMT & Packaging – January 2009 – 39
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53