This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Features • To connect HC2 probes to a PC via the Ethernet interface • Requires HW4 software on the PC • Power supply via mains adapter (order separately) • Range of application: -40...70 °C
Ethernet converter for HC2 probes Order code
AC3005 AC1207
70
ø3.2 ø7
ø7 ø3.2
34
Description
UART <> Ethernet Mains adapter 9 V
Cable length 35 cm
15 1
RS-485 and Modbus converter for HC2 probes
Features
• To connect HC2 probes to a RS-485 or Modbus network • It is possible to switch between Modbus and RS-485 protocol in the HW4 software
• Power supply: 5…28 VDC • Range of application: -40...70 °C
10 5
RS-485 / Modbus converters Order code
E2-01XX-MOD E2-02XX-MOD E2-05XX-MOD
Note: Self-heating of the converter can lead to errors in the measured values; it is therefore advisable to place the probe a short distance away using an extension cable (e.g. E2-F3A).