FEATURE DUST & FUME EXTRACTION DUST COLLECTOR GIVES ATEX PROTECTION
The Quad Pulse Package PX dust collector from Camfil Air Pollution Control (APC) offers high performance in a compact unit designed for processes that produce hazardous dusts in high concentrations. A cleanable filter system facilitates
continuous manufacturing processes and eliminates frequent costly replacements. Constructed to provide the highest explosion protection in accordance with ATEX standards this space-saving unit can be located indoors with no need for additional explosion safety devices. Thanks to a segmented cleaning process performed during operation the
Quad Pulse Package requires a single primary filter cartridge. The high efficiency primary pleated filter comes in a conductive (anti-static) nano fiber or PTFE media and offers exceptional dust release for extended life, energy savings and reduced change-out schedules. It prolongs the service life of the second- stage HEPA H14 filter that provides 99.995% efficiency to capture the finest, most harmful dust particles. Using materials from the aerospace
industry, the HEPA filter functions as a tested flame and contamination barrier. In addition, the pressure-resistant housing maintains integrity with no damage during an explosion event. For hazardous dusts requiring full containment to protect workers and prevent cross-contamination a user- friendly bag-in/bag-out (BIBO) containment system is available to ensure safe-change at all stages: primary filter, HEPA filter and dust discharge. An integrated fan providing the required suction is insulated within the unit for quiet operation. Indoor installation capability significantly reduces install costs and time by simplifying ducting requirements and allows easy access for all maintenance functions. Applications include chemical, cosmetic, medical and applications characterised by low airflow requirements for combustible dusts.
Camfil APC
T: 01706 363 820
www.camfilapc.com/europe
AirBench has released a modular booth designed for attachment to the VertEx cross-draught system. A full environmental containment booth can be built rapidly from standard parts. The use of very high efficiency fans
allows the complete booth installation to operate from low power supplies while achieving very high airflows. The booth shown above is around 2.5m
wide, 2.4m high and 2.2m deep and draws more than 20,000m3/h. This air movement and the associated booth lighting all runs from a single 13a socket. The fully modular construction allows for any width of booth to be delivered using standard components and VertEx base units. The VertEx Booth is available with the
full range of AirBench filters up to and including H12 HEPA filtration as required.
AirBench
T: 01206 791191
www.airbench.com/vertex
CONFIGURABLE DUST COLLECTORS BUILT FOR RIGOROUS APPLICATIONS
To ensure a perfect fit into most manufacturing applications that generate dust, smoke or fumes Nederman has introduced its L-series modular and fully configurable dust collector to create a safe working environment while achieving low emissions to atmosphere to meet increasingly stringent environmental and health and safety regulations. Since no two facilities are the same the L-series
dust collectors are flexible and configurable to match a wide range of needs in the collection and recycling of dust, smoke and fumes. The L-series offers a wide portfolio of filter media in bag or cartridge format which ensures that performance and filter life is optimised whatever the contaminant. After selection of the correct filter media the dust collector is configured to match the required airflow and application characteristics. The L series is modular and assembled from a limited set of stocked panels. This enables Nederman to offer very low lead times for all the range with some standard preconfigured filters available in just two working weeks. The L-series can be expanded to adapt to future process changes or new regulations. New filter modules can easily be added whenever increased filter capacity is required. It offers low total cost of ownership due to low power consumption, minimum maintenance needs and extended filter lifetime. It can be supplied
10 DECEMBER 2015/JANUARY 2016 | FACTORY EQUIPMENT
either pre-assembled or fully built on-site for those occasions where access requirements prohibit the installation of an assembled filter. This may generate considerable savings on shipment costs. The Nederman L-series is available in ATEX compliant configurations for safe handling of combustible dusts and with a variety of ancillary components and equipment for configuring the dust collector and system to match all facilities operation and maintenance needs. These options include pyramid or trough type hoppers, a no-hopper venting version, dust discharge valves, dust storage bins with 50 or 100L capacity, integral or floor mounted fans and fan silencers. The L-series is suitable for applications including crusher extraction, spray dryers, foundries, mixers, grinders, kilns, welding, plasma cutting, shot blasting, thermal spraying, biomass, mining, metallurgical, food and pharmaceutical processes. Nederman has built the L Series for rigorous
applications. Robust, resilient and weatherproof, while the modular construction makes the air flow capacity virtually unlimited there are standard sizes which cater for flows of 5,000 to 300,000m3/hr depending on application and media selected.
Nederman
www.nederman.co.uk / FACTORYEQUIPMENT T: 08452 743434
HIGH EFFICIENCY CONTAINMENT BOOTH
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56