W:
edtechnology.co.uk | T: @Educ_Technology
PRODUCT REVIEW | ULTIMAKER 2 | 29
ANOTHER DIMENSION
When the big brown box that held our very own 3D printer arrived on our doorstep like a piece of futuristic technology sent back in time, I was barely able to contain my excitement as I hurried to finish off my morning emails and important tasks for the day so I could execute the “grand unveiling” of an actual 3D printer
BELOW: Ultimaker 2
By Sean Byrne
The grand unveiling Unfortunately, my scheduled “grand unveiling” didn’t quite go to plan. As we were receiving a demo unit, the printer wasn’t shut down correctly so dust and other bits of non-printable material had clogged up the nozzle in transport.
So I was greeted with a tiny,
curling drizzle of material and, after a while, a high pitched screeching of the printer trying too hard to feed the PLA material through the clogged nozzle. But Ultimaker is based on an
open source philosophy. Meaning that if you take to the forums like I did, you will almost certainly find several (hundred) people that have encountered the same problem and will have a tried and tested solution. It turned out to be a doddle,
and while unblocking the nozzle I couldn’t help but feel that I had really got stuck into the whole open source philosophy. I had asked for help and I’d found it on the other side of the globe, for free.
Press and print After my nozzle unblocking triumph, I immediately dived straight into creating my first 3D print simply by selecting PRINT and pressing GO. It’s literally that simple, plug and play. Pop your SD card into the slot, a couple of buton presses to the control panel on the front of your Ultimaker, then sit back and be treated to a mesmerising display as 3D objects appear out of thin air. There is an absolute treasure
trove of free designs available online through
YouMagine.com and
Thingiverse.com where I found and printed a DNA helix complete with A, T, C and G base binding molecules and a mapped active volcano layout that could easily be placed in a Geography classroom to kinaesthetically teach kids the composition of a volcanic mountain.
3D design I cracked open Google’s open source 3D design software Google SketchUp and set to designing my own creation. It was actually remarkably easy: there are so many free plug-ins for SketchUp that help with any problems you might encounter you’d struggle to get hung up on any one thing for a long period of time. Printing was a litle more
complicated. Some of the parts
of my model were required to be especially thin. Thankfully, as all the processes are open source, all it took was a litle tweaking in the setings of Cura to increase detail. As the Ultimaker can print detail up to 40 microns (half the width of a human hair) it didn’t struggle at all to fabricate a complete replica of my digital 3D model into the real world.
Verdict It’s no surprise that through my Ultimaker journey I was overcome with this amazing celestial feeling while watching the concepts and designs in my head become reality. I realised that anything I could imagine and draw, I could make and create out of nothing. It’s this “outside of the box”
thinking that kids would benefit from being practised in. Practical problem solving is an important part of day-to-day life in the real world and learning this way gives the opportunity to blur the lines between virtual and solid physical objects. While most primary and
secondary schools aren’t fully embracing 3D printing just yet, I suspect this amazing litle piece of tech will be welcomed with open arms into design colleges and further education institutions. With the Ultimaker 2 my
imagination as an individual was the limit of what could be created. Every problem I encountered I was able to overcome due to the open source nature and philosophy of Ultimaker. Awarding it with anything less than five stars would be nothing short of injustice. ET
Rating: Five stars, all the way.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86