Ventilation Hitting the target
With specific CO2 reduction targets set out on both UK and European levels, how can the adoption of Passivhaus principles help companies meet these targets? Here, Tunca Sekban of Airflow Developments explains the theory behind Passivhaus and looks at one of the central technologies – Mechanical Ventilation with Heat Recovery (MVHR)
operating costs and rising fuel prices are a burden to any organisation, and with the energy use of non-domestic build- ings accounting for approximately 18 per cent of the UK’s total carbon emissions, it’s no surprise that commercial properties are now being forced to think about their day-to-day operations on a number of levels, including effi- ciency, energy usage and their continuing carbon footprint. Often thought of as a specific building process that applies pri- marily to domestic properties, the performance-based set of design criteria on which Passivhaus is based is actually relevant to all building types – and already thou- sands of offices and schools have been built to these standards across the world.
Structural airtightness is the pri- mary focus in building to the Passivhaus Standard, and aims to diminish uncontrolled infiltration through cracks in the building and create a thermally efficient enve- lope that will benefit both the environment and the owner’s energy bills. Status is therefore attained after a number of strict requirements have been met, including very high levels of insu- lation, extremely high perform- ance windows with insulated frames, an airtight building fabric and ‘thermal bridge free’ construc- tion. The installation of a mechan- ical ventilation system with highly efficient heat recovery is also a stringent requirement that influ-
ences Passivhaus status. Installing a mechanical ventilation with heat recovery (MVHR) system as part of a Passivhaus upgrade will allow for sufficient and comfortable ven- tilation to all areas of a building. The energy efficient system also contributes to minimising the loss of indoor heat and promoting a higher quality of air, maintaining a balance between extraction and supply. The system will conserve energy within a building by recovering heat from the extracted air and transferring it to the incoming air. Each unit features an advanced control system enabling management of a range of periph- erals such as frost protection, heat supply and effectively setting parameters such as summer by- pass temperatures.
There are currently only seven commercial MVHR units in the UK market that have been fully tested and approved by the PassivHaus Institute – four of these are Airflow’s Duplexvent MHVR sys- tems. The introduction of Passivhaus technologies over the past few years has provided significant potential for new com- mercial buildings to operate with almost no energy costs. The strin- gent requirements can be built into commercial spaces just as eas- ily as they can with domestic buildings; the predominant con- sideration is the materials used. Of course, even if a building isn’t constructed to PassivHaus standards there is still a strong argument for incorporating MVHR.
With heating costs generally accounting for over 50 per cent of energy consumption for commer- cial property, this has amplified pressure on building and facilities managers to find new ways to improve overall energy efficiency. Utilising MVHR with high thermal efficiency (85-90 per cent) can save approximately 40 per cent on heating costs, reducing the average payback period of the MVHR unit from 7.5 years to three years against units with only 50 per cent thermal efficiency, since the more air that is ventilated the more energy is consumed to heat this air volume.
MVHR also provides a clean and healthy air supply that combats sick building syndrome. This recognised condition includes symptoms like irritation of the eyes, nose or throat and skin prob- lems, with one of the key causes of this condition being poor air qual- ity. To combat this, MVHR systems have a high efficiency, inbuilt fil- tration system to clean out air- borne particulates and VOCs while preventing damp, stale air from posing any threat to occupants. Furthermore, advancements in IT continue to enhance system control, improving control effi- ciency – such as the Duplexvent Flexi Range from Airflow. These units feature intelligent controls, incorporating an internet server with service and user interfaces. With this feature a service techni- cian can connect to the unit remotely, check the status,
diagnose any faults (if there are any) and instruct the user what to do immediately, saving service and downtime to both technician and client. Similarly the end user benefits from this by monitoring the indoor temperature, CO2 and humidity levels and accordingly changing the ventilation parame- ters if necessary in order to maintain the optimum indoor air quality at all times.
This innovative system offers greatly increased flexibility over control, with users also able to control the MVHR units remotely from laptops or smartphones. It also prevents users continually adjusting the output of the units – a common issue in workplaces and one that results in unneces- sary, wasted electricity. Efficiency can therefore be equated to more than just the fuel use of the build- ing; it can also be used to enhance the work productivity levels of the people housed within the building on a day-to-day basis.
Updated and incoming legisla- tion will ultimately mark a huge change in the way that the indus- try looks at commercial and indus- trial ventilation, with indicators that MVHR units are witnessing an increase in popularity thanks to their ability to help reduce carbon emissions and to deliver over 90 per cent heat recovery. Ultimately, by using a Passivhaus certified MVHR unit in commercial spaces, users and the building owners will benefit from a healthier atmos- phere and lower energy costs.
Bridging the gap between standard and bespoke AHUs
Mitsubishi Electric’s new range of Lossnay Kanzen air handling units (AHU) are designed to bridge the gap between standard systems and bespoke units.
The five models available bring together the company’s Lossnay heat recovery technology with the latest advanced Mr Slim heat pumps to offer customers hassle- free installation and commission-
ing. Available as the LK-500, LK- 750, LK-1000, LK-1250 and LK- 1500 models, the range offers between 3,500 and 15,000 cubic metres of air volume per hour, or between 0.97 and 4.17 m3 air movement per second. The units offer CoPs (Coefficient of Performance) of between 4.88 and 5.69 and EERs (Energy Efficiency Rating) of between 5.45 and 6.15
Daily news update at
www.heatingandventilating.net
to deliver energy efficiency previously unavailable in a standardised packaged format. “We have incorporated the absolute best of our advanced technology into one packaged solution so that we are able to offer a lot of what is normally expected in a bespoke solution as standard,” explains Jason Tinsley, product market manager for the range.
HVR | March 2014 | 35
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44