This page contains a Flash digital edition of a book.
TECHNOLOGY IN ACTION


ABB motors and drives save energy cooling costs


T


he Science and Technology Facilities Council (STFC) is saving a significant amount of its energy costs after fitting three ABB-Baldor direct drive cooling tower motor and drive systems to the cooling towers of the ISIS neutron source’s proton accelerator. Three


towers form part of the accelerator’s


primary water-based cooling system. Previously, the fans in the cooling towers were run at full speed using a conventional system consisting of a fixed speed AC induction motor connected by a drive shaft and disc coupling into a right angle gearbox. The ABB-Baldor system incorporates a permanent magnet (PM) motor. These are a viable alternative to conventional AC induction


motors and significant energy efficiency advantages,


deliver even


compared with the latest premium-efficiency types of motors. This higher efficiency is even more pronounced when run at low frequencies which is the case for these direct drive cooling tower motors.


ABB Limited Tel: 01925 741 111 Web: www.abb.co.uk/energy


enter 812 KNX Consultants


he new Hawker® BSI40™ battery status indicator is the latest battery rotation system from EnerSys®. It provides users with a cost-effective solution to manage battery fleets for warehouse trucks and other mechanical handling equipment. The system enables life-long service reliability, efficiency and sustainability. It has been designed for use with the Hawker® Lifetech® HF range of high frequency chargers and can also be integrated with existing chargers by the addition of optional sensors. The BSI40 panel is suitable for wall or rack-mounting and can manage up to 40 chargers. Four panels can be networked which means a maximum of 160 chargers can be supported by a single system – more than enough capacity for most fleet users. The batteries can be configured in up to ten separate groups or families. In this way the BSI40 system can manage chargers and batteries with different specifications to provide operators with a high degree of flexibility, adaptability and scalability.


EnerSys® Web: www.enersys.com


New offices for KNX Consultants A


specialising in KNX control and


Better battery management T


enter 813


s a result of continuing growth in demand for its services, KNX Consultants has moved into new larger premises near Gloucester.


The


company, a member of the KNX UK Association, specialises in supporting electrical contractors, systems integrators and other professionals looking to include KNX intelligent building technology as part of their overall installation capabilities. To support them, the company offers a range of services from the start to finish of a KNX project. Installers are able procure the required KNX hardware through their preferred wholesale channels and then KNX Consultants can help them further if required with programming and system commissioning services. KNX Consultants operates as a design consultancy


automation


heating and electromechanical items as well as undertaking project work on behalf of professional clients of all sizes.


Training services are offered


too, including examining candidates to achieve KNX Partner status, mentoring and early stage project support for newly qualified KNX Partners.


Tel: 0845 009 0438 and


Accurate Energy Monitoring T


he Tinytag Energy Logger from Gemini Data Loggers is a safe non-invasive


tool for


monitoring power usage of entire premises or individual high- consumption equipment. portable,


This self-configuring device


can be used for spot-checks or for longer term recording of single or three phase power supplies. Recorded data downloaded


may to to identify identify times be of


peak load, to analyse energy profiles, and


power hungry or


inefficient equipment. The Energy Logger combines ease of use with accurate,


high level


performance. Logging can be initiated by the touch of a button, so users do not need a laptop to operate the device on site, and it does not require the exposure of any live wires or terminals. Non-invasive flexible coils are used to monitor the current in each phase of a three phase supply while the voltage information may be obtained via a standard 13A wall socket. The Energy Logger costs £795 +VAT. Data loggers in the Tinytag range accurately and reliably monitor environmental parameters including temperature, humidity, single and three phase power usage and CO2. Tinytags range from compact units for building monitoring to rugged, waterproof


devices for harsh, industrial and


outdoor applications. Manufactured in the UK, Tinytags help ensure that conditions can be measured, recorded, analysed and validated. Data loggers with displays can be supplied, and specialist ATEX


validated 36 units for recording conditions in intrinsically safe areas are also available. P Over and out....


For additional flexibility, external sensors in the form of probes offer easy access to awkward areas a logger cannot reach, such as pipework; or can be used for monitoring extremes of temperature such as those in manufacturing processes and cryogenic areas.


Data from the loggers is downloaded to a PC via a USB connection and viewed with the easy to use Tinytag Explorer software.


Gemini Data Loggers (UK) Ltd Tel: 01243 813000 Web: www.tinytag.info


enter 815


entair Pentair Thermal Management has recently been specified to provide its Raychem Winterguard frost protection and HWAT water temperature maintenance system to 20 Fenchurch Street (The Walkie Talkie) The building’s hot water services are based in a hybrid system with recirculated pipework in the risers with a single pipe on each floor to the outlets. 2500m Raychem’s HWAT-R has been used to maintain the water at a temperature of 55° degrees and 30 HWAT-ECO controllers were employed to ensure accurate temperature control, economy setback features as well as the option of a periodic legionella prevention cycle. Frost protection on the exposed pipework on the rooftop is provided by Raychem Winterguard with Eco 10 controllers. Designed by world-renowned architect Rafael


Viñoly, 20 Fenchurch Street is a visually distinctive new addition to the London skyline. The building has been constructed with maximum efficiency in mind and


between


developed two


by of a the joint venture UK’s


Pentair Thermal Management Tel: 0800 969013 Web: www.pentairthermal.co.uk


leading


partnership property


companies; Canary Wharf Group and Land Securities. enter 816 DECEMBER/JANUARY 2014 Electrical Engineering Web: www.knxconsultants.com enter 814


for lighting,


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44