This page contains a Flash digital edition of a book.
CASTING INNOVATIONS


Efficient, Effective Cleaning With Dry Ice Blasting Considering the precision required


for every component in a Mercedes- Benz engine, carmaker Daimler AG, Stuttgart, Germany, needed to quickly and repeatedly clean large numbers of parts, such as the cast pistons, engine cyliner heads and blocks. To meet strict dimensional tolerances, it was imperative the components were not altered during cleaning. Using abrasive sand blasting or blasting with glass beads can slightly damage the surfaces of the cleaned objects, while producing secondary blasting media waste that then must be disposed. Rather than opt for a complex manual cleaning system or the use of a solvent, Daimler turned to Asco Carbon Dioxide Ltd., Romanshorn, Switzerland, a company that specializes in dry ice blasting technology. The cleaning units use compressed air to acceler- ate solid carbon dioxide pellets to a speed of approximately 1,000 ft. per second. The dry ice hits the object, causing unwanted material to freeze, contract and fall off. The CO2


then


sublimates into a gas and re-enters the atmosphere without leaving any residual moisture. Te AscoJet dry ice blasting units


clean Daimler’s engine components in a timely manner and without dam- age, improving process planning and


overall efficiency. Even so, the piston’s narrow ring grooves (Fig. 1) presented an additional challenge for Asco, one where an alteration to the dry ice blasting equipment helped clean the narrow channels. Asco added a special


light on the end of the dry ice unit’s gun, and the grooves were cleaned with dry ice before the remaining contaminant was removed in an


ultrasonic bath. Visit www.ascojet-dry-ice-blasting.com for more information.


Daimler opted to use Asco dry ice blasting units to clean engine components.


Fig. 1. Asco blasting equipment cleaned the piston’s narrow ring grooves before final cleaning in an ultrasonic bath. October 2013 MODERN CASTING | 47


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68