Feature Machine safety Machine safety: It’s your duty
When considering the safety of packaging machinery, many manufacturers may ask why they should worry as surely their machinery supplier takes care of all of that. However, CE marking is not a guarantee of safety and users will still need to check the machine is safe before it is used. Paul Laidler, business director for machinery safety at TÜV SÜD Product Service, elaborates
While packaging machinery manufacturers must ensure machinery is CE marked, end users still have responsi- bility to make sure a machine is safe before it is used
I
ndustry statistics highlight how important it is that end users do not rely on machinery suppliers’ safety claims alone. The UK’s Health & Safety Executive (HSE) Register of Convictions reveals that 62 per cent of breaches under the Provision & Use of Work Equipment Regulations (PUWER) have been committed under Regulation 11 – Dangerous Parts of Machinery.
HSE figures also show that in 2010/11, while manufacturing jobs represented about 10 per cent of the British workforce, the industry accounted for 21 per cent of fatalities and 15 per cent of reported injuries to employees in the UK. During this period there were 27 fatal injuries to workers in manufacturing, with 17,599 reported non-fatal injuries and an esti- mated 27,000 self-reported injuries. HSE figures show that 11 per cent of these reported injuries involved con- tact with moving machinery. Since 2009, in order to reduce the number of injuries, any machinery
18
supplied in the EU must now comply with the new European Machinery Directive. This provides the harmonisa- tion of the Essential Health and Safety Requirements (EHSRs) in all EU coun- tries and applies only to products that are intended to be placed on or put into service in the market for the first time. The letters 'CE' on a machine is the manufacturer's claim that the machine meets the EHSRs of the Machinery Directive. This means that any packag- ing machinery offered for sale in the European Union is required to carry the CE marking to show compliance with the Machinery Directive.
When dealing with machinery safety and, in particular with CE Marking in line with the Machinery Directive, the compliance with EN standards is recog- nised as a presumption of conformity with the requirements of the Directive. Specifically when looking at packaging machines, an important addition is being made to the EN 415 series of stan- dards, which covers the Safety of Packaging Machines, and this is
intended to simplify the process of CE Marking in line with the Machinery Directive for many types of machine. The European standards bodies cur- rently use a system of ordering which can be applied in every situation, but which caused complications for pack- aging machinery suppliers. The most basic standards, known as 'Type A' standards set out requirements for the safety of machines only in the most general terms, while 'Type B' standards deal with more specific issues, such as the prevention of unexpected start-up. ‘Type C' standards deal with specific types of machine and for packing machines, the EN 415 series of stan- dards already includes C-type stan- dards for some common types of machine, such as wrapping machines, strapping machines and form, fill and seal machines, but there are many types of machine that are not specifi- cally covered. These include, among others, coding machines and inspec- tion machines. However, unless a machine-specific C-type standard exists for the machine under consideration, reference has to be made to all of the relevant individual standards, which can be a complicated, expensive and time consuming process. To help remedy this situation, EN 415-10 General Requirements, has been developed to complement the existing nine parts of EN 415. This has the effect of a C-type standard that applies to “packaging machines for use in work places which are listed in EN 415-1 and which are not the subject of one of the specific C standards of EN 415”. This means that packaging machine builders and suppliers will, in most cases, no longer have to work with a long list of individual standards for their products to meet the require- ments for CE marking, but will instead be able to refer simply to this new part of EN 415.
TÜV SÜD T: 01489 558100
www.tuvps.co.uk Enter 316
As the process has now been simpli- fied, manufacturers should feel more confident that their packaging machin- ery supplier’s self-declaration of compliance with the required standards is accurate and that their employees should remain safe while using such machinery in the workplace. However, a plea of ignorance from the end-user business is not acceptable as failing to comply with both the Machinery Directive and PUWER, whether knowingly or unknowingly, can have serious and far-reaching con- sequences for both employers and their employees.
NOVEMBER/DECEMBER 2012 Factory Equipment
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56