Manufacturers of Structural Fasteners
With a vast stock portfolio of standard, non preferred and blank forgings, there is little we cannot offer on a next day delivery to almost anywhere - worldwide!
Keeping the world from falling apart
PRE-LOAD FASTENERS: HIGH STRENGTH FRICTION GRIP HR/HV Standard production from M12 to M36 in diameter and up to 300mm in length, however, larger sizes can be manufactured to order. Available in Self Colour, Electro-Zinc and Galvanised finishes from stock. certification and testing available on all bolt configurations.
EN14399-3 HR/HV 8.8 & 10.9 EN14399-6 Hardened Washers EN14399-9 DIMPLE™ DTI Washers M12 - M36 diameters (1/2” to 1.3/8”)
Dinstock and Dimple are trademarks of Dinstock Ltd, registered in the UK.
FOUNDATION BOLTING: SQUARE SQUARE & HEXAGON BS.7419 DIN.601 4.6, 8.8, A2, A4
M12 - M48 diameter and up to 1,500mm lengths HEXAGON BOLTING NON PRE-LOAD (SB)
DIN.931, 933, 960, 961, BS.1768: 4.6, 8.8, 10.9, 12.9, SAE5, SAE8 M10 - M76 diameter, 3/8” - 3” diameter
ALLTHREAD RODS: 1M,2M & 3M LENGTHS DIN975 4.6, 8.8, 10.9, 12.9, B7, B8 M10 - M100 diameter
TIE-RODS & ENGINEERS STUDS DIN975 4.6, 8.8, 10.9, 12.9, B7, B8 M10 - M100 diameter
APPROVED QUALITY • Full In-house testing on all bolting, nuts and washers to meet with all EU/CE requirements for pre-load and non pre-load bolt assemblies.
• Specific Lloyds approval achieved for CE certifying EN14399 8.8 bolting. • Certified to ISO 9001:2008 with Lloyds Registrar.
Dinstock Ltd, Unit C1 Hortonwood 10, Telford, Shropshire, TF1 7ES, United Kingdom Tel. +44 (0)1952 676700 Fax. +44 (0)1952 676800
sales@dinstock.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164