SHAKEOUT/CLEANING/FINISHING Grinding Wheels
Crushers
Engis Corporation continues to expand its offering of Dia- ForZ™ diamond electroplated grinding wheels and burrs for foundry cleaning rooms. Using our 40+ years of experience in the manufacture of diamond plated products, we have a proven track record of success in providing wheels for robotic and hand grinding operations in gray & ductile iron foundries, and more recently have expanded into new materials and ap- plications. Dia-ForZ wheels improve workplace safety, lower cleaning costs, generate less waste and contribute to a better working environment . Call Engis today to find out more.
ENGIS CORPORATION 105 W. Hintz Rd., Wheeling, IL 60090 847/808-9400 Fax: 847/808-9430
info@engis.com
www.engis.com
VIBRA-DRUM® Sand and Casting Processors
The HERCULES Crusher from KOINS is designed to break Gates, Sprues and Returns. Capacities ranging from 4 to 16 tons/hour are available. Inquire for larger sizes. VIKING Technologies is the distributor of these units, which feature automatic lubrication systems and an adjustable exit open- ing, allowing the material to be crushed to the desired size. The crushing plates and teeth are made from Swedish wear resistant specialty steel, ensuring long life.
VIKING TECHNOLOGIES
25169 Dequindre, Rd., Madison Heights, MI 48071 586/914-0819 Fax: 248/564-0857
goran.lowback@viking-technologies.com www.viking-technologies.com
Blast Cleaning Solutions
Proven in hundreds of applications worldwide, VIBRA-DRUM® sand and casting processors have revolutionized high volume mold/sand handling for foundry applications. This versatile two-mass system removes sand and tramp metal without dam- aging castings, reduces sand lumps to original grain size, and equalizes shakeout sand temperature—all in one continuous, energy-efficient operation. VIBRA-DRUM®
two-mass vibrating
drums deliver capacities to 400 TPH, and have a simple, easy- to-maintain, non-rotating design with all the environmental benefits of a totally enclosed rotating drum—but with no air handling, sealing, or interface problems and no casting damage.
GENERAL KINEMATICS CORP. 5050 Rickert Rd., Crystal Lake, IL 60014 815/455-3222 Fax: 815/455-2285
mail@generalkinematics.com
www.generalkinematics.com
METALCASTING EQUIPMENT, PRODUCTS & SERVICES 2011-12
Foundries rely on Wheelabrator® cleaning solutions. MeshBlast®
equipment for their blast systems are used to clean a
variety of sand cast parts and components. An adjustable speed flow-through conveyor design, the MeshBlast system can eliminate potential part damage caused by part-on-part contact typical in tumbling cleaning systems. Each MeshBlast system is available with 4 to 8 blast wheels and has an abrasive cleaning and recycling system that removes sand and contami- nants for longer lasting wear parts and lower operating costs.
WHEELABRATOR GROUP
1606 Executive Drive, LaGrange, GA 30240 800/544-4144 Fax: 706/884-9940
info@wheelabratorgroup.com www.wheelabratorgroup.com
25
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32