Switches/Routers/PoE/Adapters
EX17008/EX17016 PoE Switches
ET-EX17008, ET-EX17016 • 8 or 16 ports 10/100TX (PoE) • All ports 15.4W per 802.3af • 1024/4096 MAC addresses • 512k/1500k buffer memory
• Web browser managed - IP configuration - Port based VLAN - QoS priority
• Auto-negotiation - MDX/MDIX - Speed 10/100 Mbps - Full/Half duplex
• Full wire-speed forwarding rate • Internal 100VAC - 240VAC power
EX17242 PoE Switch
ET-EX17242 • 24 ports 10/100TX (PoE) • 2 ports combo 1000T + SFP slot • All 10/100 TX ports 15.4W per 802.3af • 4096 MAC addresses • 2750K buffer memory
• Web browser managed - IP configuration - Port/tagged VLAN - QoS priority - MAC/port trunking - Port mirroring - RSTP & STP - Broadcast storm control
• Full wire-speed forwarding rate • Internal 100VAC - 240VAC power
EX78000/EX76000 PoE Switches
ET-EX78000, ET-EX76000 • 8 or 16 ports 10/100TX (PoE) • 2 ports 1000TX combo 1000SX/LX • All 10/100 TX ports 15.4W per 802.3af
• Fully managed layer 2 switch - Console, telnet, web browser - SNMP
• All management features • 8192 MAC addresses • 2000k buffer memory • Hardened -40° C to 75° C • 48VDC power input
79
EL100/EL200 Media Converters
ED3101/ED3141 Ethernet Extender
ET-ED3101, ET-ED3141
Install IP cameras and other devices using existing phone wire or other communications cable. • Ethernet to 1 pair of wire • 1 switch setting local/remote • Up to 1,900 meters @ 1Mbps • Up to 300 meters @ 50Mbps
• ET-SD3101 - Ethernet to 1-wire pair (-10° C to 60° C) Compatible with EMC1600 Chassis
• ET-SD3141 - Ethernet to 1-wire pair (-40° C to 75° C) DIN rail mount
ED3331/ED3341 Ethernet Extender
ET-ED3331, ET-ED3341
Install IP cameras and other devices using existing coaxial cable. Replace an analog camera with IP camera and use the same wiring.
• Ethernet to coax cable • 1 switch setting local/remote • Up to 2,600 meters @ 1Mbps • Up to 200 meters @ 85Mbps
• ET-SD3331 - Ethernet to coax cable (-10° C to 60° C) Compatible with EMC1600 Chassis
• ET-SD3341 - Ethernet to coax cable (-40° C to 75° C) DIN rail mount
ET-EL100, ET-EL200
Replace analog cameras with IP cameras and use the same fiber optic cable. • 10/100TX (RJ45) to fiber optic 100FX
• Auto-negotiate on the RJ45 - Speed 10/100 Mbps - Full/Half duplex - MDX/MDIX
• SC or ST fiber optic connectors
• Multi-mode or single-mode - Various distances to 100 km
• Link fault pass through • 2048 MAC addresses • EMC1600 chassis available (16 slots)
• EL200 is WDM optics (single fiber) - Multi-mode 2 km - Single-mode up to 100 km
www.adiglobal.com | All products available in North America unless otherwise noted.
IP Solutions Catalog
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126