16:45 Cored, Stable Aluminum Tube Inlays for High Pressure Die Casting, Magnesium Castings and Other Casting Processes
F. Heppes, Dr. S. Rupp, Drahtzug Stein combicore GmbH & Co. KG, Grünstadt, Germany
17:15 End Thursday, June 30
10:00 Knowledge-Based Control of Molding Processes in Foundries by Real-Time Analysis of Product and Process Data
M. Dittrich, Heinrich Wagner Sinto Maschinenfabrik GmbH & Co. KG, Bad Laasphe, Germany, D. Metz, Prof. Dr. M. Grauer, S. Karadgi, Universität Siegen; Prof. Dr.-Ing. J. Bast, TU Bergakademie Freiberg, Freiberg; Dr. G. Dieckhues, Ohm & Häner Metallwerk GmbH & Co. KG, Olpe, Germany 10:30 High Volume Production With Inorganic Core Technology at Volkswagen Foundry Hanover
K. Gehring, Dr. F. Hansen, G. Jäger, S. Uhde, Volkswagen, Hanover Foundry, Hanover, Germany; K. Löchte, Dr. U. Pohlmann, Hüttenes-Albertus Chemische Werke GmbH, Düsseldorf, Germany 11:00 Technology and Configuration of Porous Burners Made by promeos
Dr. J. Volkert, promeos GmbH, Erlangen, Germany 11:30 Modulated Machine Design for Core Production With Inorganic Binder
R. Wintgens, Laempe & Mössner GmbH, Schopfheim, Germany 12:00 Cleantech: The New Core Making Process for Aluminum Casting
M. Vargas, S. Sarrazin, Tung-Fai Lo, Hüttenes Albertus, France 12:30 The Path to an Economical and Emission-Free Foundry
B. Münker, Daimler AG, Stuttgart, Germany; R. Böhm, Hüttenes-Albertus Chemische Werke GmbH, Düsseldorf, Germany; M. C. Schneider, MAGMA GmbH, Aachen, Germany
13:00 Break
13:15 Higher Productivity by Enhanced Coatings for the Gravity and Low Pressure Gravity Die Casting Process Dr. R. Stötzel, ASK Chemicals GmbH, Hilden, Germany
13:45 Simulation as a Tool to Reduce the Time to Market – HPDC First Shot, Meet the Tolerances
K. Weiß, C. Honsel, R. Vomhof; RWP GmbH, Roetgen, Germany; H. Zeilmaker, C. van den Broek, Brabant Alucast Products BV, AN Oss, Te Netherlands; R. Krack, Schaufler Tool- ing GmbH &
Co.KG, Laichingen, Germany 14:15 FGS–High Pressure Diecasting Without Gating?
Dr. N. Erhard, D. Gerwig, Oskar Frech GmbH + Co. KG, Schorndorf-Weiler, Germany 14:45 Lower Your Cost Per Casting by Precise Molding With the DISA Match Machine
B. Haugbølle, DISA Industries A/S, Herlev, Denmark; V. N. Satyanarayana, DISA India, Bangalore, India
15:15 Some Remarks on the Reclaiming Technology for Inorganic Core Sands
Prof. Dr. T. Steinhäuser, B. Wehren, Universität Duisburg, Essen, Germany 15:45 Force Control – Robot Based Machining
M. Kohlmaier, M. Kremer , ABB AG, Wr. Neudorf, Austria 16:15 Water-Free Electrostatic Spray Technology for High Pressure Die Casting
K. Togawa, H. Ohira, H. Komatsubara, M. Kobayashi , Aoki Science Institute/Lubrolene, Tokyo, Japan; R. Aoki, T. Hattori, Asahi Sunac, Owariasahi, Japan; T. Butler, Ultraseal International, Coventry, U.K. 16:45 Energy-Efficient Decentralized Dust Separation Technology Using the Example of Fettling Shop
B. Müller, Keller Lufttechnik GmbH + Co. KG, Kirchheimunter Teck, Germany
17:15 End Friday, July 1
12:45 Project for Energy and Resource Conservation During Die Casting
U. Jordi, Bühler Druckguss AG, Uzwil, Switzerland 13:15 Experiments and Modeling of Rotary Degassing for Aluminum Foundries
Dr. P. V. Evans, Technology Strategy Consultants, Blackwell, U.K.; R. Simon, A. Froescher, Foseco Foundry Division, Vesuvius GmbH, Borken, Germany; R. Kendrick, Foseco U.K., Tamworth, U.K. 13:45 Simulation Makes Core Manufacturing in the Foundry Transparent
M. Schneider, I. Wagner, MAGMA Gießereitechnologie GmbH Aachen, Germany 14:15 Wedge Theory – New Approach to Explain the Formation of “Chunky Graphite” in Ductile Cast Iron
A. Udroiu, Satef Hüttenes Albertus Spa, Italy 14:45 Detection and Evaluation of Defined Quality Criteria in Casting Production
R. Radecker, Microvista GmbH, Blankenburg, Germany; H. Meishner, Nemak Wernigerode GmbH, Wernigerode, Germany 15:15 Effects of Various Parameters on the Nodule Distribution in Heavy Section Casting
S. Grenier, C. Labrecque, Rio Tinto Iron & Titanium, Sorel, Canada 15:45 Additive Manufacturing Processes for the Production of Sand Molds and Shells: Modern Trends and Possibilities for the South African Foundry Industry
D. Nyembwe, Department of Engineering Metallurgy, Univ. of Johannesburg, South Africa
16:15 Closing Remarks
Dr. Gotthard Wolf, VDG Verein Deutscher Giessereifachleute e. V., Düsseldorf, Germany 16:30 End
April 2011 MODERN CASTING | 45
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68