Baths EcoTemp Water Baths u Unstirred with temperature stability ±0.2°C
u Stainless steel tank with galvanised steel casing finished in powder coating with carrying handles and drain screw
u Built-in PID temperature controller with large LED display and splash- proof membrane keypad operation
Model No. Nominal tank volume
Working temperature range* Stability
Display, resolution Timer
Bath opening x depth °C
±°C °C
TW8 u Overtemperature alarm/shutdown at 130°C protects from dry running
u High and low temperature level setting with audible alarm to protect sensitive samples
u Accessory liquid level/cooling set enables counter-cooling and constant liquid level
TW12
litres 812 20 to 99.9 0.2 0.1
mm
mm kg
20 to 99.9 0.2 0.1
1 minute to 9 hours 59 minutes — all models 230 x 270 x 140
290 x 320 x 280† 8.1
350 x 270 x 140
400 x 320 x 280† 9.8
TW20 20
20 to 99.9 0.2 0.1
500 x 300 x 180
Accessory racks accepted 234 Overall W x D x H Weight Heater
*Can be operated down to 20°C using accessory liquid level/cooling set. † EcoTemp Water Baths, Julabo
As described. Unstirred. For 230V 50Hz single phase supplies.
BJ430-10 TW8 BJ430-15 TW12 BJ430-20 TW20
Accessories Lift up lids
kW 222 Fitting the accessory lid increases the height by 160mm. Test tube racks
One-piece moulded transparent Makrolon lid with handle and hinges. The lid is shaped to direct con- densation back into the bath tank via the sides.
BJ435-04 Lid for TW8 bath BJ435-08 Lid for TW12 bath BJ435-12 Lid for TW20 bath
Plastic, with stainless steel lifting frame for tubes as indicated. Supplied singly. Please refer to table for individual bath requirements.
BJ435-18 For 60 tubes BJ435-22 For 90 tubes
16/17mm diameter 12/13mm diameter
BJ435-26 For 90 microtubes 60mm high x 11/12mm diameter
BJ435-30 For 21 tubes 30mm diameter
Liquid level/cooling set
Fits into the drain screw opening. Provides counter- cooling for low temperature applications and constant liquid level, when continuously fed with mains water.