Cope-Elga Vision Deionisers u High quality water instantly available u Simple to install – wall mounting u Colour change resin u Supplied with dispensing spout u Hand held dispensing gun accessory on flexible lead
Cope-Elga Vision Deionisers provide quality water as and when it is required. The need for elaborate and costly storage is eliminated. Just turn on the mains water tap and take off the water instantly either through the top dispensing spout or the accessory hand held dispensing gun. The resin changes colour when the cartridge is exhausted.
Model Max. Flow rate Max. Input pressure
Mains water connection Typical water quality
Typical output, water areas Hard (400-500ppm) Mid (100-300ppm) Soft (40-80ppm)
l/h psi
µS/cm
litres litres litres
kg
Vision 125 60
90 (6 bar)
Vision 250 60
90 (6 bar)
0.5" BSP hosetail both models 0.1 to 10 both models
80 to 100 150 to 400 500 to 900
2.5
170 to 200 300 to 800
1100 to 1900
Overall dimensions H x W x D mm 385 x 92 x 100 660 x 92 x 100 Weight
4.2 Vision Deionisers, Cope-Elga With colour change cartridge and dispensing spout.
DB030-10 Vision 125 DB030-20 Vision 250
Spare Cartridges DB030-60 For Vision 125 DB030-65 For Vision 250
Accessory for both models DB030-80 Hand held dispensing gun on flexible lead
Water Purity
Ultra-pure water, as produced by the Cope-Elga Vision, is almost entirely free of dissolved mineral salts, including silica, and will have a neutral pH since the dissolved CO2 will have been removed. From an inorganic standpoint, ultra- pure water will conform to International Pharmacopoeia and laboratory grade specifications for purified water.
For less critical applications the Cope-Elga Vision is capable of producing pure water at the end of each cartridge run, extending its life by approximately 25%. Pure water is similar to ultra-pure water although CO2 and silica will be present.