Disposable syringe filters designed for use in a wide range of sample filtration applications. Incorporates Anopore inorganic membranes with a precise non- deformable, even honeycomb pore structure. The membrane is sealed within a hexagonal shaped polypropylene body with luer lock fittings. These filters are compatible with most organic solvents and aqueous solutions. All versions are available in a gamma-irradiated sterile form and with glass microfibre pre- filter enabling larger volumes of difficult solutions to be filtered.
Anotop 10 Anotop 10 Anotop 25 Anotop 25 Plus
Membrane
diametermm Membrane type Prefilter type
Housing material Construction process:
Operating pressure maximum (psi)
Average membrane thickness
Device width
Inlet connection Outlet connection Hold-up volume
10 10
Anopore — all models —
25
Glass — Microfibre
Polypropylene — all models Thermal weld — all models
Extractable materials Low Low Low 100
µm 60 mm 14
length mm 18 µl <20 100
60 14
18 <30 100
60 31
25
Female luer lock — all models Male luer
Low 100
60 32
25
Male luer slip <150
<200
Plus 25
Glass Microfibre
FC365-10 FC365-14 FC365-18
FC365-26 FC365-32
Supplied in packs as indicated. Anotop 10
Pore size µm Ref. 0.02
0.1 0.2
0.1 0.2
6809 1002 6809 1012 6809 1022
6809 1112 6809 1122
Anotop 10 Plus with prefilter Pore size µm Ref. 0.02
FC365-39 FC365-47
Anotop 25
FC367-15 FC367-20 FC367-25
FC367-30 FC367-40 FC367-45
Pore size µm Ref. 0.02
0.1 0.2
0.2 0.1 0.2
6809 2002 6809 2012 6809 2022
6809 2024 6809 2112 6809 2122
Anotop 25 Plus with prefilter Pore size µm Ref. 0.02
FC367-52 FC367-54 FC367-60 FC367-65
0.1 0.2 0.2
Anotop LC™ Syringe Filters
Designed for simple and effective sample preparation prior to HPLC, removing particulates which may damage and reduce the operating life of chromatography columns. An Anopore inorganic membrane is housed within a hexagonal shaped, pigment-free polypropylene body. Membrane pore sizes and filter pack sizes are as indicated. With luer slip female inlet and male outlet fittings.