Reaction Flasks and Lids Wide neck reaction flasks
A range of spherical* flasks from semi-micro to pilot plant scale fitted with large diameter flat flange joints. This design has several advantages over conventional conical jointed flasks.
u Lids can be easily detached u Large stirrers can be accommodated u Vessels can be easily cleaned
u Quick and easy addition and removal of solids or resinous material
u Flasks and lids using the same size joints are fully interchangeable
*QFR700F is cylindrical shaped and fits a 500ml heating mantle.
QFR:LF
QFR:LF with QMAF: and QJC100F
Multi-socket/flat flange lids
A series of multi-socket lids for use with the Quickfit range of wide neck reaction flasks and culture vessels. They allow introduction of a great variety of standard Quickfit equipment for stirring, temperature measurement, aeration and general distillation procedures. The parallel side neck can be fitted with a multiple adapter so that larger dropping funnels can be used. Lids with a single socket neck are of use where simple extraction, refluxing or mixing only are required.
Flange Centre Parallel bore mm
socket
QMAF1/75 QDA5/75 QMAF2/2 QMAF2/32
QMAF2/41 QMAF2/52 QMAF3/52 QDA4/100
QMAF4/41 QDA5/100 QMAF5/2
75 75
100 100
100 100 100 100
100 100 100
19/26 socket
34/35 — — 19/26 19/26
14/23 19/26
19/26 19/26 24/29
19/26 14/23
19/26 19/26
14/23 5° 19/26
Side sockets 10°
19/26 —
14/23 19/26 19/26
29/32 — — 29/32
34/35 — — 34/35
19/26 —
Clips for flanged flasks and lids To fit vessels with flange bores as indicated.
QJC75F For 75mm bore flanges QJC100F For 100mm bore flanges 14/23 15°