LENS STANDARD
Vision industry in urgent need of lens standard
Professor Dr Bernd Jähne at HCI, Heidelberg University, and an EMVA board member, argues that an open lens-camera communication standard would greatly benefit the machine vision community
P
ermanent change and innovation characterises the machine vision industry. Te two most prominent examples are
machine learning, which is revolutionising the way image data are analysed, and embedded vision systems, which is changing the processing platforms. Amazingly, there is one component in an
image system that has not yet changed since the early days of the machine vision industry: the lens mount. C-mount with a one-inch thread, 32 threads per inch and a flange focal distance of 17.256mm is the most common type of screw lens mount. It is much older than the machine vision industry. Invented in 1926 by Bell and Howell for 16mm film cameras, it has since been used by analogue CCTV cameras before being finally overtaken by digital cameras. For larger image sensors nothing new has been invented. Instead, lens mounts from SLR cameras such as the Nikon F-mount or the screw mount M42 x 1 are commonly used. Tis is a really surprising fact. In the constantly changing world of machine vision, the lens mount seems to be something rock solid: aſter it was invented, it was simply used and never changed. Does this mean that the lens mount works
perfectly for machine vision systems? Tis unfortunately is not the case; 30 years ago it was apparent that the machine vision industry is missing something. In 1987 Canon introduced the Electro-Optical System (EOS) for digital information and power transmission between SLR cameras and lenses, and used it to produce lenses with built-in auto focus motors. Such a standardised system was not available for the
machine vision industry, but for some time this deficit did not matter because auto focus systems were quite rare. Today, however, the situation has
changed completely. Take all the possibilities that have already been implemented in commercial system cameras plus modern methods of computational imaging, and combine this with the processing capacities of modern embedded vision systems. Ten you get an idea of how powerful and different the next generation of image acquisition
systems could be. Some of the set-ups are: l Power supply for lenses with motors and other electronic components;
l Auto focus systems (also including novel systems with liquid lenses) and return of the distance setting;
l Setting the focal length for zoom lenses and reading back the current focal length;
l Control and reading the aperture setting;
l Inquiry of lens properties by the cameras, such as aperture dependent lens shading, geometrical distortion, and lateral chromatic aberration. With this information the camera can automatically correct these distortions;
l Vibration and motion compensation during image acquisition;
It is now essential to develop [a lens standard for] the next generation of vision systems
l Intelligent image acquisition: automatically setting the aperture and/or the exposure time to capture a given scene with the required depth of field;
l Automatically capturing a focus series, and computing depth maps and images with extended depth of field;
l All other kinds of optical systems with extended depth of field. Te camera is sent a signal about the type of EDOF implemented in the lens and automatically performs the required processing;
l Correction or modification of the modulation transfer function (MTF) of the lens or camera system. Tis may include automatic adaptation of the lens sharpness to the pixel size of the camera;
32 Imaging and Machine Vision Europe • December 2017/January 2018
l All kinds of super resolution camera systems. Currently there are, at most, a handful of machine vision cameras available that use a standardised camera lens communication system. Tese include the XiB cameras from Ximea, with a Canon-EF mount, and the Exo tracer camera from SVS-Vistek, with a micro-four-third mount. An open lens camera communication standard would open up many possibilities within the machine vision community. Te communication protocol should be the same for small integrated systems containing a lens, sensor and possibly a processing unit for mobile devices, up to large-format sensors. New precise and stable lens mounts would be required for high-accuracy metrology applications, because bayonet mounts show too much play. A new and open lens
camera communication standard would be even more powerful if light sources and camera positioning were included. In this way, systems with automatic or controlled illumination and automatic tracking could also be engineered. It is really surprising to see that such an
essential part of a vision system as an open camera lens communication standard has been overlooked for such a long time by the industry. It is now essential to develop it, in order to make the next generation of vision systems possible. Tis is why the European Machine Vision Association (EMVA) wants to push such a standard in cooperation with the other G3 associations for the sake of the global machine vision industry and its users. O
@imveurope
www.imveurope.com
Artem Samokhvalov/
Shuttersock.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
