MARKET REPORT STORMFORCE continued
HSC increases its range
The Hire Supply Company (HSC) has increased its Elite submersible pumps range by adding two ‘dirty water’ pumps capable of handling 7mm solids. The SPT500 2in heavy-duty model (pictured) is available in 110V, with or without a float switch. It has a 500W motor, offers a maximum head height of 12m and can handle 210 litres per minute. In its drying equipment range for this season, HSC is offering metal-
bodied quartz halogen infra-red heaters which only heat solid objects rather than the surrounding area making them suitable for emergency spot drying. The heaters will be available in 110V or 240V and are rated at 2400W to reduce transformer burn out on 110V units, and to minimise the potential to overheat sockets and plugs with 240V equipment. Also available is the highly portable EH1500 model which has a 1500W single element and is again offered in 110V or 240V. The HSC line-up also includes the Master range of electric fan heaters and indirect diesel models, and the company says it can now
Be prepared with Obart
Obart Pumps’ Tsurumi LSC1.4S ‘puddle sucker’ has been popular for hire fleets since the 1980s. Its ability to pump down to 1mm makes it useful for flooding applications. It is designed to run for extended periods with little or no water, providing a defence against ongoing water seepage. Obart also offers the Floodmate
flood protection emergency kit. This is available in four formats, one of which incorporates the LSC1.4S and is supplied with two 10m lengths of discharge hose, 10m of power
cable and two absorbent Hydrosacks. The items are supplied a carry case with enough room to store tools and emergency rations.
01622 355000
www.obartpumps.co.uk 01372 571200 Fast work with Pramac
For areas at risk of flooding, Pramac-Generac’s MP pumps are designed to deal with large volumes of water quickly. The self-priming models can move sandy or muddy waters at rates of up to 1,340 litres per minute. Also included in the Pramac Green Range is the PW Series of petrol and
diesel driven cold water pressure washers. Designed to be user friendly and compact, the machines can provide up to three hours of operation.
01270 445777 24
www.pramac.com
www.humiditysolutions.co.uk
supply units from 3kW right up to 225kW on a next-day service throughout the UK mainland. In addition, the Master line-up includes dehumidifiers to speed up restoration and renovation work. HSC’s cold water pressure washer range includes Simpson
professional models made in the USA. These have an aircraft grade aluminium chassis carrying a ten-year warranty, CAT pumps and Honda GX engines. A ‘Dial N Wash’ facility allows the user to control the pressure from the lance assembly.
0115 946 1988
www.hscuk.co.uk High-spec Humidity Solutions dryer
Humidity Solutions’ BD70LHS rota- moulded building dryer is designed for flood recovery work and is of heavy-duty construction. It incorporates a strengthened axle, metal connectors for the hose, rotary controls for simple operation, an hour counter and a built-in water pump. The manufacturer
states that the unit can remove 70 litres of moisture per day at 30°C and 80% relative humidity (RH), and 44 litres per day at 26.7°C and 60% RH.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60