Morrelli and Melvin.
Among the modern equipment at Triac’s 3000 m2 facility in Ho Chi Minh City is a seven-axis Kuka robotic CNC machine mounted on a 23-metre track for milling complex tooling moulds. This is in addition to other CNC machinery, an 8.5 metre autoclave and other equipment that makes Triac a regional leader in the production of complex composites. The factory is on a river with direct access to the sea so boats of any size can be sailed away.
‘We use pre-preg carbon for the high-strength parts such as the cross beams (which are cured in the autoclave), chainplates and bulkheads,’ says Koch. ‘The cross beams are tapered on the ends so assembly is easy, the fit in the main hull is perfect and it’s strong as hell.’ Construction is infused carbon/ vinylester laminates on closed-cell PVC cores for high-strength areas and E-glass where carbon is not needed. Vinylester is used in the hull and deck laminates for good adhesion and better compatibility with the gelcoat finish than with epoxy laminates, which are used in the structural elements of the boat. Construction meets ISO/CE standards and with CE Category A certification.
The mast is carbon and on the Rapido 60, the diamonds are Future Fibres’ carbon EC-6 attached to a titanium plate tensioned by a hydraulic ram positioned at the mast base. The ram allows easy tensioning for tuning. Deck gear has all Harken
Top:
designed and built for fast, safe ocean crossings, the Rapido 60 is a powerful passage- maker with a wide, stable platform and slim, very easily driven waterplanes. Note the flare in the main hull which significantly boosts the boat’s interior volume
while hardly increasing wetted area. Above: on the Rapido 60 (pictured) and 50,
keeping the main saloon on the same level as the cockpit promotes an airy ‘flow- through feel’
winches and blocks, with Spinlock and Karver clutches and Karver halyard locks to reduce rig compression loads, which are adjusted at the tack of the headsails by deck-mounted tensioning systems. The furling Solent genoa mounted on the inner forestay is self-tacking and the mainsail reef system uses Karver reef hooks mounted on Dyneema straps wrapping the boom to distribute the loads with minimal chafe. A furling fractional Code 0 and a masthead furling gennaker tack on the bow just ahead of the headstay. Two Harken winches on the cabin top forward of the helm station handle main and Solent sheet loads. Rope clutches for halyards, mast rotation and board up and down controls are positioned to use the same winches. The boom has truss wings with netting to catch the full-battened mainsail, which is on Antal sliders for easy hoisting, reefing and furling. On a windy tight beat the Rapido 60’s performance is amazing, with racing monohull angles (thanks in part to the deep carbon fibre daggerboard) and speeds of 17+kts, while at reaching angles the boat far exceeds windspeed with exhilarating acceleration. There is a sweet spot between 18 and 23 knots where the boat simply purrs with one finger on the wheel. Even at 27kts the feeling of absolute control, comfort and security is most apparent.
‘At 10 tons in racing mode and up to two tons more when fully equipped and provisioned, the Rapido 60 is a perfect platform for long-distance and ocean cruising,’ says Koch. ‘The Rapido 50 is also suitable for this kind of cruising, while the Rapido 40 is designed for more regional use. We are excited about offering these easy, fun to sail, safe performance trimarans that have so much living space. Interest in these fast and innovative designs is strong as they fill a real void in the market.’ For ratios of length, beam and displacement trimarans generally offer greater sail-carrying power and
higher performance than equivalent- sized catamarans. Because all the elements of the propulsion, electrical and plumbing systems are contained in one hull and not spread across two, there is also less weight to drag through the water and the centre hull’s design can be more forgiving in trim variation than with most cats. Trimarans are more stable and more sea kindly than monohulls and catamarans and do not have the slamming and fore-and-aft pitching of cats or the terrible 30 degrees-plus heeling of monohulls. Centralising all heavy equipment in the centre of the main hull, as Rapido does, contributes immensely to comfortable, stable movement through the water.
Accommodation can be as spacious as most monohulls and given the angles they sail at, even in hot summers there’s usually good air flow and shade. Retractable daggerboards and rudder blades enable exploration and anchoring where fixed-keel monohulls cannot venture. Being able to anchor nearer the shore means even coming late to an anchorage one generally gets the prime spots.
As the space taken by support systems is only in one hull, it leaves the outboard amas available for light item storage, water toys, fenders and ropes. The R60 has a custom hatch to access the four-metre-long storage area. With the foredeck and “acres” of nets to lounge on safely even at speed, plus the aft deck with custom outer seating, separate cockpit and generous saloon (plus cabins), owners, crews and guests can choose to be sociable or find their own private space. The other standout is the helm position, with complete 365- degree visibility and views of the bows of all three hulls.
While monohulls will heel at 25 or 30 degrees, making basic daily tasks and just getting around the boat something of a tiring and even athletic event, trimarans with their relatively flat sailing give far greater comfort, better rest and less stress. The longer centre hull and centerline- mounted rudder and daggerboard contribute to having better monohull- like manoeuvrability than catamarans, particularly while tacking. The lack of a bridge deck also eliminates the slamming of waves common to most catamarans, which significantly affects their ride quality and speed when sailing upwind. Safety is also an issue that is well addressed in most trimarans. The R60’s construction is foam sandwich with many watertight bulkheads making it essentially unsinkable.
www.rapidotrimarans.com
www.triaccomposites.com
q SEAHORSE 73
DOUGALL LOVE/JANICE KNOWLES
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124