Machinery News
TheMagicTouch introduces a new desktop oven
F
or those looking to cure DTF transfers quickly and easily, TheMagicTouch has introduced a new portable desktop oven.
The oven is designed for consistent results when manually curing DTF transfers up to 50x40cm. It has a digital controller for precise settings of temperature and time. The curing process starts at the touch of a button and alerts to remove the cured powdered transfer film.
This new model with its integrated air purifier operates as a normal 220V appliance and uses a traditional base heating element as opposed to lamps or bulbs. This ensures even heat distribution across the transfer with reduced curing time and lower temperature requirements. The portable ovens have also proved popular with DTF users using existing automatic finishing units as the oven allows short-run and samples transfers to be produced quickly and very cost effectively.
New DTG solution by Stratsys paves the way for personalised, sustainable fashion
A DTG solution has been developed for the J850 TechStyle printer
The new portable desktop oven
New Vastex dryer increases productivity and saves space
A S
tratsys has launched a direct to garment solution for the J850 TechStyle printer, which looks to redefine the future of personalised fashion and sustainability. The DTG solution is ideal for customisation and personalisation by enabling the application of full colour multi-material 3D print directly on fully assembled garments of various fabric types including denim, cotton, polyester, and linen. It allows fashion brands to facilitate personalised and bespoke designs for customers, including the ability to tailor 3D prints according to individual preferences, sizes, and styles. Zehavit Reisin, senior vice president commercial solutions, Stratasys, said: “Many brands are limited in how much they can mass produce denim clothing, while maintaining a level of
www.printwearandpromotion.co.uk
personalisation that has meaning to the wearer.
“We are giving brands the opportunity to do something remarkable, to bring more character to their clothing line, while pushing a more sustainable business practice that appeals to multiple audiences across the consumer spectrum.” The DTG tray kit is available in two sizes.
The DTG solution enables the application of full-colour 3D prints
new Vastex PTF-100 powder-to- film coating system with integral D-100 conveyor dryer increases
production of DTF films by applying and curing adhesive powder
quickly and conveniently. The PTF- 100 features an angled steel casing and clear
polycarbonate door with
dust-tight seal for
mess-free operation. Supplied as standard are two interchangeable cartridges, each of which can hold approximately 1.4 kg of adhesive powder, for quick and clean refills. The coating cabinet accommodates film up to 406 to 508 mm, and features an adjustable timer.
The compact D-100 dryer with 46cm wide conveyor allows adjustment of temperature, belt speed and heater height to cure DTF film at high rates. An integral exhaust hood removes moisture and fumes for operator safety, which is especially critical in confined spaces typical of many DTF shops.
June 2024 | 21 | The new Vastex dryer
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
