HUMIDIFICATION & DEHUMIDIFICATION Water purifier for humidifiers


Low maintenance and effective humidification solution


The EcoMist system from HUMIDECO has been designed to provide efficient and precise humidity control for any commercial or industrial environment. Said to use less than 1% of the energy consumed by a steam humidifier, the EcoMist system has low operating costs and features stainless steel components, including an oil-free pump and non-drip nozzles, for a longer service life. There are two ranges available:


The CONDAIR RO-E is a reverse osmosis water purifier designed for use with humidifiers. Its primary function is to remove minerals from the supply water before it reaches the humidifier, which reduces the amount of limescale left behind when water is boiled, evaporated or sprayed into the air. As limescale is the main service requirement for any humidifier, lowering the mineral content helps decrease maintenance and supports steadier operation. In steam humidifiers, the Condair RO-E


also improves humidity control, as the boiling chamber does not need dilution cycles to manage mineral levels. Without these cycles, water temperature and steam


output remain more consistent. The range is designed to deliver water with mineral levels suited to the type of humidifier. Steam units typically need water that is around 95–98% mineral-free, while the Condair RO-E+ model for spray humidifiers provides water that is about 99% mineral-free to support hygienic operation and reduce the risk of nozzle blockages. An optional touch-screen controller can be mounted on the unit or remotely, offering access to operation and history. Outputs run from 40 to 300 litres per hour, with internal or external storage vessels and recovery rates of 50% for hard water and 70% for soft water. ▄ www.condair.co.uk


EcoMist for industrial and process applications and EcoMist HVAC for large air handling units. A system consists of a number of humidification units, strategically positioned within the facility, served by a central high pressure control unit, with water pre-treatment where necessary. The humidity level is monitored and controlled with one or more humidity sensor units. The low noise humidification units


can be wall or ceiling mounted. These can be combined, together with Humideco’s control units and sensors, to form a system specifically designed to meet the needs of various requirements, regardless of size.


The Eco-Mist nozzles can also be


mounted on pipework headers, ideal for large open facilities with a high roof space; dust suppression applications; or evaporative cooling in warmer areas. ▄ www.humideco.co.uk


LOW-ENERGY COOLING FOR A WARMER FUTURE


Why choose Humidity Solutions?


- + - Talk to our experts:


T: +44 (0)1372 571 200 E: info@humiditysolutions.co.uk W: humiditysolutions.co.uk


EIBI | JULY / AUGUST 2026 +


Bespoke system design &


technical support +


Installation, commissioning & maintenance


+


Decades of humidity control expertise


Climate Wizard. Smarter Cooling. Lower Energy.


- + -


No chemical refrigerants Up to 80% lower-energy consumption Suitable for new and existing


buildings 25


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36