HEALTH & SAFETY
STAY WARM, STAY SAFE - MAKING SURE YOUR TEAM IS WINTER READY
it leaves workers feeling uncomfortable or affecting their ability to carry out tasks, they are less likely to wear it, or wear it correctly and, therefore, will be unprotected should an Arc Flash occur. Bulky and rigid PPE is frequently worn incorrectly - it’s all too easy to wear an everyday belt, to roll sleeves up or undo a jacket when a garment is uncomfortable, but all this seriously compromises the safety of an individual against an Arc Flash. However, uncomfortable PPE can now be a thing of the past. Garments made with inherent fibres instead of a coating added post- production, allow movement, breathability and moisture management, meaning workers can go about their tasks with ease.
4. WATERPROOF A
s the warmer months come to an end, and the colder and darker months begin to draw in, protecting workers from the elements of the winter weather becomes a priority for the manufacturing sector. However, it’s important that this protection from the harsh winter does not compromise on protection against Arc Flash - a relatively misunderstood, but extremely common type of electrical explosion.
With this in mind, Mark Lant, technical expert at ProGARM, Arc Flash protective clothing specialists, explains five factors that must be considered to ensure workers are both warm and safe this winter.
1. LAYERING
It can be very tempting for workers to layer up during the colder months to help stay warm while outdoors. However, many workers are unaware of the dangers that are posed to them by layering up with every-day, non arc-resistant, garments beneath their outer PPE.
In reality, the material worn beneath an Arc Flash protective jacket or trousers is just as crucial to protecting from the event as outer clothing. While the flames caused by an Arc Flash may not actually come into contact with skin or indeed the clothing beneath the protective outer layers, the extreme heat from the event can melt the materials used to manufacture everyday undergarments, including nylon, cotton, and polypropylene. This will inflict burns on an operative and potentially cause any day-to-day
undergarments and layers to melt into the skin underneath their PPE.
In order to not compromise on safety, whilst also ensuring workers stay warm during the colder weather, workers should layer up with Arc Flash protective base layers, such as leggings, tops, gloves and even underwear and socks, beneath their outer garments.
2. BREATHABILITY
During winter, wearing layers of PPE that trap moisture is not only uncomfortable, but can also be dangerous. If a garment’s material is not sufficiently breathable, moisture can remain on the skin, which can cause a chilling effect and even lead to hypothermia. Arc Flash protective clothing that is manufactured from inherent protective fibres instead of a protective coating added post- production, allows breathability and moisture management. The fabric readily absorbs sweat and then dries quickly, meaning that worker can stay warm in winter, without overheating if wearing multiple layers.
3. COMFORT
Arc Flash protective clothing has historically been thought of as uncomfortable. This is primarily because in the past, the clothing was typically made from fabrics that provided great protection, but were often heavy and stiff, and that were rough against bare skin.
A garment can offer the ultimate protection, but if 42 OCTOBER 2019 | FACTORY&HANDLINGSOLUTIONS
It goes without saying that winter is the wettest season of the year, and therefore ensuring sufficient waterproof protection of your team is essential to keep workers warm, comfortable and safe. However, it’s important that workers have separate waterproof garments for winter and for summer, as jackets that are designed for the warmer seasons will not be sufficient for providing the warmth that workers require during the colder months. Summer waterproof garments are specially designed to be extremely lightweight to help workers stay cool during the warmer weather. Instead, workers should opt for heavier garments which feature lining to provide an extra layer of warmth.
5. HI-VIS
While those at risk of an Arc Flash are already encouraged to wear full protective PPE throughout the year, workers crucially need to be very visible once dark mornings and afternoons become a daily occurrence. Yet highly visible Arc Flash resistant clothing is often disregarded in winter due to lack of flexibility and warmth. However, high-visibility clothing is essential in reducing the risk of accidents and fatalities on industrial premises, and in winter the need for highly visible clothing is only heightened due to the shorter daylight hours and poorer weather conditions. When it comes to hi-vis clothing, it’s important to opt for long-lasting garments which can provide that protection doesn’t come out in the wash. Multiple laundry cycles should not remove the vivid colours necessary to keep your team visible while at work.
ProGARM
www.progarm.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90
