Drying, Curing & UV
CondAlign – conducting a great business
By David Lyus, international sales manager at GEW (EC). C
ondAlign is a young, thriving technology company based in Oslo, Norway. Its core business is in the development of innovative conductive films for various applications, turning existing materials into high- value products through a patented technology to align particles in polymers. A new pilot roll-to- roll (R2R) system has been installed at CondAlign by Emerson & Renwick, with an integral, dual lamp GEW LeoLED UV curing system which instantly cures the polymer coatings to fix the position of the aligned particles. CondAlign works with a range of products to customers from several market segments. This can be electrically conductive tapes and substrates, as well as thermal-interface materials for the electronics industry, biocompatible films to the healthcare sector, and membranes for gas and liquid separation. The application areas define the required material properties for each film, such as conductivity, elasticity, thickness, weight, softness, transparency, adhesiveness and biocompatibility.
Due to this diversity of applications, the film thicknesses can range from 5 µm to 3 mm. The heaviest films are often the thermally conductive type and contain ceramics or compounds such as boron nitride. This poses a challenge for the UV curing system and in order to ensure a consistent cure, the second UV LED lamphead has been designed to be reversible so that it can also irradiate from underneath the sample. Phillip Mayhew is the lead engineer at
CondAlign and works most closely with the new R2R system. He highlights the ease of operation of the machine, and how the UV LED curing system contributes to that simplicity: “I think the best one can say about the UV LED system is that it just does its job every time, without an issue. I can adjust anything I want on it and it just works exactly and perfectly every time. We’ve been using it for around nine months now and we are usually only operating at around 20% to 30% of the LED’s power capability. “With the thickest, thermally conductive films we go up to around 60% power, so we still have plenty of room for manoeuvre.” He adds: “The line speed we can run at tends to be dictated by the time taken for the particles to align under the electrode plates, not the curing process.” CondAlign also works with heat cured materials and has in the past used a mercury arc curing system for UV-cured polymers, but the heat generated on to the films was problematic and could cause wrinkling. Moving to LED has
solved this issue, as minimal heat is generated by the LED modules during the curing process. UV-cured materials are preferable in all the applications where UV curing is an option, as Mr Mayhew explains: “A typical heat-cured material requires five to ten minutes drying time at 150°C and our machine is around five metres in length, so as you can imagine our line speed would be prohibitively slow, never mind the heat generated and the costs incurred. Fortunately for us, LED provides the perfect solution. To give a comparison, with LED we can now hold the substrate temperature at a steady 25°C.” With so many business opportunities suited to CondAlign’s products and services, the challenge for the tight-knit team is to focus their time and resources on the most fruitful areas of business.
As Morten Lindberget, vice president of business development and sales at CondAlign explains: “There are so many avenues – there is a huge market in displays for consumer electronics, and the entire area of thermal interface material is growing rapidly due to the electric vehicle market. There are also ECG electrodes, hybrid flexible electronics and medical patches, just to mention a few. But too much business is a good problem to have, and we now have the right technology and UV equipment to enable us to maximise each and every sales opportunity.”
Xwww.gewuv.com
22
May 2022
www.convertermag.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46
