Cable Management Why wholesalers play a crucial
role in compliant cable installation Jake Green, head of technical engagement with Scolmore Group, which incorporates the Unicrimp division of cable accessories, explores how correct cable support prevents strain and damage – and why wholesalers are central to ensuring contractors have the right products to meet BS 7671 requirements.
F
or wholesalers, cable support is more than a simple add-on sale. With BS 7671 placing clear obligations on installers to protect cables from mechanical strain and damage, contractors rely heavily on their wholesaler to supply compliant, high-quality fixings and accessories.
Why cable support matters Regulation 522.8.1 of BS 7671 requires wiring systems to be selected and installed so that cables and their terminations are not damaged during installation, use or maintenance. In practice, this means contractors need access to a wide range of support solutions – and they often turn to wholesalers for guidance on what’s appropriate for each job.
Regulations 522.8.5, 522.8.11 and 522.8.12 go further, stating that: •
• •
Supports must not have sharp edges
Fixings must not damage the cable This places real emphasis on choosing the right product for the right application – something wholesalers are ideally positioned to support.
Types of support wholesalers should stock
Contractors expect wholesalers to carry a broad and reliable range of cable support options, including: • • • • •
Cable ties
Cable cleats Cable clips
Cable tie accessories Cable glands
Products such as Unicrimp metal cable cleats and Unicrimp brass meter tail glands are examples of items that help installers meet compliance requirements while ensuring long- term system integrity.
The choice of fixing depends on the installation surface (e.g., clips for timber, ties for basket tray, and the cable type (e.g., cleats for SWA cables). Wholesalers who understand these distinctions can better support their customers
ewnews.co.uk
Guidance contractors rely on The IET On-Site Guide (OSG) remains a key reference for installers. Appendix D provides recommended spacing for cable supports, with Table D1 detailing distances for accessible cable runs. For example: •
•
Larger cables can be supported at greater intervals
Wholesalers who understand these guidelines can help contractors select the correct quantity and type of fixings – improving customer service and reducing returns.
and strengthen their technical credibility.
Cables must not be subjected to mechanical strain
Bending radii are also critical. Regulation 522.8.3 requires cables to be bent without placing strain on internal conductors. The OSG’s Table D5 gives examples, such as the minimum bending radius for 1.5 mm² twin and earth.
Cable entry: a common point of failure Wholesalers frequently supply the accessories that prevent damage at cable entry points. • •
Two issues must be addressed:
Sharp edges on metal boxes – requiring grommets or bushings
•
Strain on terminations – requiring proper support and compression glands Stocking the right glands, grommets and strain-relief products ensures installers can meet Regulations 522.8.5 and 522.8.12.
A cable with a diameter up to 9 mm requires closer clip spacing
What this means for wholesalers Electrical wholesalers are a vital link in ensuring safe, compliant installations. By offering a comprehensive range of cable supports – and understanding the regulatory drivers behind them – wholesalers can help contractors meet BS 7671 requirements; reduce installation faults and call-backs; strengthen customer trust and increase sales of complementary products.
August 2026 electrical wholesaler | 19
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40
