Advertorials
MIPI Interface TFTs Winstar have announced a new range of TFT LCDs with a MIPI Interface
The MIPI Display Serial Interface (MIPI DSISM) defines a high-speed serial interface between a host processor and a display module. The interface enables manufacturers to integrate displays to achieve high performance, low power, and low electromagnetic interference (EMI) while reducing pin count and maintaining compatibility across different vendors. Designers can use MIPI DSI to facilitate brilliant colour rendering for the most demanding imagery and video scenes and to support transmission of
stereoscopic content. Sizes are 5 inch , 7 inch and 8 inch.
http://www.mansky.co.uk/news/ winstar-have-announced-a-new-range-of-tft-lcds-
with-a-mipi-interface.html
http://www.mansky.co.uk/products/display/tft/ mipi-interface-tfts/
Lab-Power; high power DC power supplies The Professionals choice for programmable dc power
Lab-Power’s range of DC power supplies are a natural choice for any application requiring a compact, efficient, high performance Programmable DC Power Supply. There are a wide range of models from 2.4kW to 250kW available offering just the voltage and current range you require and with over 400 models to choose from, there is a power supply for every application…
The front panel control features Intuitive operation with variable voltage and current control which can be set and displayed on the high visibility display. In addition to voltage and current, power and resistance can also be displayed.
Lab-Power Power Supplies combine their advanced digital control with switch mode technology to give a clean stable output to power today’s most demanding loads.
Manhattan Skyline Ltd. Tel: 01344 307733
www.mansky.co.uk
Antenova introduces Robusta - a very low profile
GNSS antenna for metal surfaces Antenova’s Robusta antenna operates in the 1559-1609 MHz bands and uses a new layered design that enables it to radiate effectively when it’s mounted on a metal surface.
The antenna measures 23mm x 16mm x 1.7mm and comes with a100mm or 150mm cable and IPEX MHF connector and an adhesive pad for easy integration into a device.
It can be used on metal objects such as a bicycle frames, motor cycles, vehicles, containers or any other property that needs to be tracked and located accurately.
It is also a good choice for smart lighting and smart meters.
Contacts:
www.antenova-m2m.com/sales@antenova-m2m.com
Application include. • Automotive EV HEV • Aerospace and Satellite Test • DC Motor Testing • Telecom and IT Industry • Automated Test Equipment • Solar Panel Simulation • Water Purification • Semiconductor Testing • Battery Charging and Testing • Electroplating • Plasma
Lab-Power continue to lead the industry in achieving outstanding power densities ensuring the most compact units possible. All Lab-Power Programmable DC power Supplies have been designed and built in Germany to meet exacting standards and have proved highly effective in laboratories, test and production environments, indeed anywhere that reliable power is required. Safety of valuable equipment is assured by an Over Voltage Protection feature: if either the operator of the power supply, or the device being powered exceeds the preset OVP value, the supply shuts down and will not automatically come back on line until it is manually (or remotely) reset.
Features • Compact design, up to 94% efficient • High performance • Power range from 3kW to 150kW. More by paralleling several units • Intuitive front panel operation • Fast response to load changes • Constant current/voltage/power /resistance simulation • Over Voltage Protection – the output shuts down at the programmed level • Short-circuit and overload proof • RS232 & Digital/analogue control interfaces (Standard) • Solar simulation software with Lab-View driver is available • Temperature controlled fans, no unnecessary noise • Air flow is front to back, no additional cooling needed in racked systems • Long life at full power • Master/Slave parallel and series configurations • Output On for preset time, Volts/Amps per second slew, both user selectable • Special versions on request. High slew rate option available
Lab-Power DC Power Supplies are sold exclusively in the UK by Telonic Instruments Limited.
Tel: 0118 9786911
www.telonic.co.uk www.lab-power.com
Kemtron launches a flame retardant
conductive elastomer for RFI/EMI shielding. Kemtron, the British manufacturer of RFI/EMI shielding gaskets, materials and components has launched a flame retardant, low smoke, low toxicity EMC shielding gasket. Tested and approved to the international standard UL94V-0 by Underwriters Laboratories for flame retardancy, file number E344902.
The material is a nickel coated graphite loaded into silicone elastomers, product code SNG-FR, the gasket provided a highly electrically conductive path between mating flanges of an electronics equipment enclosure giving a high level of RFI/EMI shielding. Nickel coated graphite in silicone is the most cost effective of all the electrically conductive silicone
elastomers and its performance in many applications will exceed that of silver based products due to its more aggressive surface finish providing a very low surface contact resistance. The material can be supplied as an extruded strip in various profiles, “O” rings or flat die cut gaskets. Electrically conductive pressure sensitive adhesive can be applied to flat gaskets to aid assembly.
Kemtron Ltd
www.kemtron.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
