Advertorials PSDG-48 Fully integrated 48W PSU
The PSDG-48 series is a fully integrated COTS multi-output 48W isolated power supply board mount module.
Dedicated to 24 & 28 Vdc military and High Reliability applications, ideally suited to ensure compliance with MIL-STD-461, MIL-STD-704, MIL-STD-1275, ABD100 and DO160.
- Ultra wide input range (10-100 Vdc) - Up to 3 double outputs - Reverse polarity protection - Hold-up function - Short circuit and over-voltage protected outputs
- Temperature range : -40°C to +105°C - External synchronization of switching frequency
- Ultra compact 3,6’’ x 2,15’’ x 0,41’’
GAÏA Converter
info@gaia-converter.com
www.gaia-converter.com
Elegant case for embedded PCs in various PCB formats
channels for sliding square nuts or threaded strips, which serve to secure the mainboard circuit board by means of variable-length spacer bolts. In addition, the lateral guide grooves also integrated into the case mounting or with a top-hat rail mounting for DIN EN 50022 mounting rails. Fischer Elektronik has added another version to the EMB series. The new case with the part number EMB 215 T is similar to the existing EMB 215 enclosure in terms of its dimensions and heat dissipation properties, but instead of extruded threaded channels, it has T-slots that are used to integrate threaded strips, which are used to fasten the base plate. This design is particularly advantageous for applications in which the base plate has to be removed from time to time to replace or maintain the electronic devices, etc. or if the case is used in a robust application with vibration interference, e.g. on a machine, using mounting brackets or mounting 200, 250 mm). Additional mechanical processing, surface treatments and labelling are realised according
Please contact us. For further information and inquiries please contact our sales team and technical support at Fischer Elektronik.
Fischer Elektronik GmbH & Co. KG +49 2351 435-363
METCASE’s New Universal Carry Handles For Portable Electronic Enclosures
These ergonomic carry handles double as desk stands. They can be adjusted in 30° increments, enabling the device to be positioned at the perfect angle for viewing and operation. Ordering the handle kit requires the customer to specify two parts. Firstly, there is a side arm kit which includes two diecast zinc side arms and location bosses (incorporating the spring ratcheting mechanism), two snap-in moulded push-buttons, two anti-glide rubber rings (for stable positioning on the table-top) and the assembly screws. Fitting the side arms simply involves machining three holes on each side of the customer’s enclosure.
between the two side arm assemblies. The dimension is simply the width of the customer’s enclosure (where To order the handle bar, simply select the handle colour part number and replace the XXX at the end with the required dimension. For example: for a 350 mm wide customer enclosure, the machined bar METCASE can supply these handle kits painted in alternative RAL colours. For special colours, the
View the METCASE website for more information:
https://www.metcase.co.uk/en/Accessories-for-Enclosures/Universal-Carry-Handle-Bars.htm
METCASE ENCLOSURES 01489 583858
www.cieonline.co.uk sales@metcase.co.uk www.metcase.co.uk ODU Medisnap Connectors from Selwyn Electronics….
instrumentation and medical applications, the MEDI-SNAP range combines distinctive coding options with Push-Pull and Breakaway mating variants. With up to 5000 mating cycles, and IP50, IP64, IP67 protection in mated condition with an IP68 unmated receptacle available, this versatile range can be used in any application. Thanks to its space-saving design, high contact density, and right-angle options, the ODU MEDI-SNAP ensures top performance even in the smallest available space. Touch protection in accordance with IEC 60601–1 (2 MOPP / 2 MOOP). The transmission of various media is also possible with this range and the plastic housing is fully sterilizable There are new, high voltage inserts for this ODU range, enabling the reliable transmission of up to
1,000 VAC to IEC 60664. In addition they are capable of preventing “Hot plugging” by featuring a special pin layout design with lagging contacts in the smallest installation space. only applied at the interface once connection has been fully and correctly established. This rules out both mating and unmating connectors under load and therefore also prevents any resulting damage to the device. This also ensures the long-term reliability of the interface itself as well as the connected device. To complement this range, both cable assemblies, silicon overmoulding are available.
Selwyn 01732 765100
Interconnect@selwyn.co.uk Components in Electronics
www.selwyn.co.uk October 2024 57
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64
