Advertorial


upon cable insertion, allowing the FPC to be inserted and secured in a single operation. These mechanisms improve assembly consistency and resistance to vibration when compared with friction-based retention alone.


Contact geometry designed for stability


Two-point spring contact structures are employed across multiple Hirose series to provide stable contact pressure and effective wiping action during insertion. This contact geometry helps maintain electrical stability within the specified mating life of the connector, even in environments subject to vibration or temperature variation.


Support for high-speed interfaces Selected Hirose FPC/FFC connectors are designed to support high-speed interfaces with standards such as MIPI D-PHY, eDP v1.4 and USB 3.0, subject to appropriate system-level design conditions. Connector performance is optimised through controlled contact geometry and shielding, contributing to stable signal transmission in demanding applications.


Flexibility in system design To accommodate different mechanical and routing requirements, Hirose offers top- contact, bottom-contact, vertical-entry and right-angle configurations. This range enables designers to optimise PCB layout, cable routing and enclosure integration without compromising connector performance.


Hirose Electric FPC/FFC connector portfolio


FH75/ FH75M Series Pitch: 0.5 / 0.4 mm


Height: 2.0 mm Series FH75/M FH63S FH62 FH67 FH34


Pitch (mm)


0.5 / 0.4 0.5 0.25 0.5 0.5


Height (mm)


2.0 2.8 1.1 5.2 (vertical) 1.0


Operating Temp


-40°C to + 125°C


-55°C to +105°C


-55°C to +85°C


-55°C to +125°C


-55°C to +105°C


Product comparison table


FH63S Series Pitch: 0.5 mm


Height: 2.8 mm


FH67 Series Pitch: 0.5 mm (vertical entry)


Height: 5.2 mm


Designed for automotive and industrial environments, the FH63S series combines a mechanically robust housing with a one-action locking mechanism for efficient assembly. Two-point spring contacts provide stable electrical performance to improve EMI-sensitive applications.


FH62 Series Pitch: 0.25 mm


Height: 1.1 mm


display and embedded applications. As system architectures continue to evolve, FPC/FFC connectors remain a critical element in achieving compact, reliable and manufacturable electronic designs. Through careful attention to mechanical design, contact stability and assembly efficiency, Hirose Electric continues to support engineers developing automotive, industrial and consumer systems with increasing performance demands.


With shielding and an operating temperature range up to 125°C, the FH67 series supports use in automotive ECUs and industrial control systems. The one-action locking mechanism improves assembly repeatability, while two-point spring contacts help maintain consistent electrical performance.


FH34 Series Pitch: 0.5 mm


1.0 mm


Discover how Hirose Electric can elevate your next design with miniature, reliable and innovative connectors — all backed by Anglia’s broad and deep inventory model, ensuring extensive stock holding across the Hirose portfolio.


With a wide range of products available straight from inventory, Anglia helps you accelerate development and reduce lead times.


Contact us today at www.anglia-live.


com or scan the QR code to explore the full range of Hirose Electric connectors available for immediate delivery.


Locking


Mechanism Side-catch lock


One-action lock One-action lock One-action lock Back-flip lock


Contact Design


Two-point spring


Two-point spring


Spring contact


Two-point spring


Spring contact


Key


Characteristics Fine pitch,


vibration resistance


Shielded option, robust housing


Ultra-low profile


Shielded option, vertical entry


Layout flexibility Typical Applications


Automotive modules,


industrial control ADAS,


automation systems


Cameras, wearables


ECUs, industrial controllers


Displays, embedded electronics


The FH75/M series provides a compact solution for applications requiring fine pitch and stable retention. Two-point spring contacts help maintain consistent electrical contact, while robust side-catchers improve FPC retention under vibration. The series supports operating temperatures up to 125°C, making it suitable for automotive and industrial modules.


www.cieonline.co.uk


The FH62 series addresses applications where extremely low profile is required. Despite its compact size, the connector provides stable retention and is suitable for high-speed signal transmission when used within recommended design parameters. Typical applications include compact consumer devices, camera modules and portable electronics.


The FH34 series offers top- and bottom- contacts to support flexible PCB routing. A back-flip locking mechanism enhances FPC retention under vibration conditions typical of consumer and industrial electronics, while high-speed signal capability supports


Components in Electronics March 2026 11


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44