Advertorials New design case CURVE (CU 109 47 ...)


The comprehensive range of cases from Fischer Elektronik is now extended by the new design case CURVE. The elegant aluminium case with the part number CU 109 47... consists of two half-shells which are fitted against each other and contain practical details such as guide grooves for inserting 100 mm Eurocards or mounting panels. Furthermore the half-shells have guide channels for the insertion of nuts and threaded strips, which, among other things, enable non-standard PCBs to be mounted. The half- shells are closed off and fixed in place by the front and rear panels, which are locked in place by threads in the profile using a screw fastening. The screw connections of the front panel and rear panel, which are made from above and below, are each concealed by a modern design frame. The frames used for this purpose are simply pushed onto the assembled case profiles without any additional tools, snap into the grooves provided for this purpose and require no further fastening or fixing. The circumferential and slightly protruding anti-slip decorative strips do not only accentuate the elegant design, but also enable safe and non-slip use as bench case. The decorative frames are offered in six different colour combinations as standard: ultramarine blue and ericaviolet, ultramarine blue and carmine red, ultramarine blue and daffodil yellow, luminescent green and black, black and pure orange, and pure orange and daffodil yellow. The CURVE design case is available in six different lengths (80, 100, 120, 160, 200, 220 mm) and in black (SA) and natural colour anodised (ME) finishes. The basic case as well as the cover plates can be mechanically processed, surface-treated and printed according to customer requirements. The CURVE design enclosure is supplied as a disassembled kit including cover plates and mounting material. For EMC shielding of the built-in electronics, the cases can be extended with EMC seals and an EMC silicone tube on customer request. The conductivity of the aluminium components is achieved by an optional transparent passivation. Contact us. The product specialists at Fischer Elektronik will be happy to assist you for further information and inquiries.


Fischer Elektronik GmbH & Co. KG +49 2351 435-0


info@fischerelektronik.de www.fischerelektronik.de/en/


BEC Distribution Ltd has announced a distribution agreement with Euro-Block, an established, global terminal block manufacturer based in Italy


The products include single- deck and multi-deck terminal blocks, plug-in connectors and spring terminal blocks. The Euro-Block terminal


blocks combine cost- effectiveness with high quality. They are available on short lead times, with many ex-stock, offering a fast-turnaround alternative to well-known manufacturers such as Phoenix Contact, Sauro, PTR, Euroclamp, Stelvio Kontek, and many others. Euro-Block PCB terminal blocks and connectors are designed and manufactured in accordance with


major international standards and each component is manufactured using high-quality materials. The plastic body is made from a PA66 Polyamide V0 self-extinguishing plastic, conforming to GLOW WIRE standards. The result is a quality product providing excellent mechanical and electrical properties. The soldering pins are made of copper alloy with tin plating over nickel plating to ensure reliable


soldering even with the new lead free soldering system. The connecting clamp is also made of copper alloy with nickel plating, offering high corrosion resistance.


BEC Distribution Ltd 01844 275824 Socket your BGA’s with Selwyn Electronics….


The Interconnection Specialists, Selwyn Electronics are pleased to offer an extensive range of Ball Grid Array (BGA) socket and adaptor systems. From 1.27mm down to 0.3mm


pitch versions and solutions for terminating BGA, LGA, QFN, LCC and QFP devices, Selwyn can offer an economical method of device validation and development where soldering the device to the PCB is not practical. Alongside the low insertion


force socketing systems, is range of adaptors onto which the device can be soldered and then loaded into a socket or pinned out to a custom footprint, this also subjects the device to a lower thermal stress level than soldering direct to a PCB. If you can provide the details


of your device, we can provide a socket/adaptor solution for you.


Selwyn Electronics 01732 765100 interconnect@selwyn.co.uk www.selwyn.co.uk www.cieonline.co.uk www.bec.co.uk The knobs can be specified with or without a pointer line on the side. They fit securely on


potentiometer spindles, using the tried and tested collet fixture system. The maximum torque for installation is 1.5 Nm (function 1.2 Nm).


Each knob comprises two parts – a hard inner body made of robust polycarbonate and a soft-touch


TPE outer shell with a smart and practical grooved appearance. They are available in two sizes: ø 36 mm and ø 46 mm (boreholes 6 mm, 1/4”). The standard colours are nero black and volcano grey.


Accessories include LED illumination kits, bases, covers, round nuts and a spanner.


OKW can supply CONTROL-KNOBS fully customised. Services include CNC machining, printing, laser marking and installation/assembly.


Visit the OKW website for more information: https://www.okw.co.uk/en/Potentiometer-Tuning- knobs/Control-Knobs.htm


OKW ENCLOSURES LTD 01489 583858 sales@okw.co.uk www.okw.co.uk


Components in Electronics June 2022 49


Award-Winning OKW CONTROL-KNOBS For Menu-Driven Electronics


OKW’s elegant rotary/click CONTROL-KNOBS have won an iF Design Award 2022. Hailed as “perfect all round”, they now feature a new, improved design with greater illumination (option).


The iF DESIGN AWARD is one of the most important design prizes in the world. For 65 years, designers and manufacturers have worked to win the internationally renowned iF label.


Ergonomic CONTROL-KNOBS are ideal as the central element for menu-driven electronics – typically


for devices manufactured in high volumes. Applications include measuring and control; medical, wellness and laboratory technology; HVAC; communications; Smart Factory and building control systems.


These soft-touch tuning knobs fit rotary potentiometers or encoders with round shaft ends (DIN


41591). Illumination is via SMD LED technology (5 V). RGB LEDs allow individual lighting and colours, illuminating a translucent optic ring on the top. OKW has increased the number of LEDs on the larger knobs from eight to 12. (The smaller knobs have eight LEDs).


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58