TECHNOLOGY IN ACTION ADVERTORIAL


Embedded ARM Core Front Panel Solutions from ITRON (U.K.) LTD


I If you can’t find the fault, take a closer look


components and assemblies. One of the biggest issues in non-destructive inspection


C


is getting a clear visualisation of the area of interest with sufficient resolution to be able to detect the smallest faults. A straight 2D image could mask issues where the correct low angle image can see them easily. Equally CT isn’t always the answer as the part in question may be in the middle of a large board. In this circumstance a high resolution reduced angle CT could give you the required images.


Our Nordson Dage Quadra 7 system, with 100nm resolu-


tion, full CT and tomosynthesis capability, can image the smallest of structures and our engineers are experienced in the analysis of the images and, if needed, reconstruc- tion into 3D models.


Cupio Services u 01256 262800 u www.cupioservices.co.uk


upio Services offers a comprehensive X-Ray, optical and acoustic non-destructive analysis service for electronic


tron's powerful ARM9-based embedded TFT modules provide serial interfaces to link host and peripheral devices using USB, RS232,


RS485, Async, SPI, I2C, CAN and Ethernet. Most ports double up as general I/O with IRQ functionality.


Our embedded solutions allow designer engineers to move


application processing into the TFT module which reduces host overhead and enables easily manageable communication speeds. The host can send raw data to the TFT module for the operating system to process and synchronise display refresh, navigation and peripheral control.


ITRON (U.K.) LTD u +44 (0) 1493 601144 u www.noritake-itron.com


Simple to install DIN-Rail Mounted EMC Cable Shield Clamp


F


oremost Electronics, the engineering-led Essex based importer and specialist distributor of electromechanical components, announces the availability of


the icotek LFC cable clamp with EMC shield connection for use on the industry standard 30mm DIN-Rail shape C.


The new LFC cable shield clamp allows the cable shield to be connected directly to the DIN-Rail while allowing an


existing cable clamp to be used for strain relief. This cost-effective EMC shield clamp is easy to use and offers very effective earthing of single cable shields. Key features include space-saving assembly, no tools required, high vibration resistance, large clamping range from 3 to 30 mm, large shielding contact area, shield contact and strain relief separated and fits all standard DIN C-rails (16-17 mm). Icotek EMC cable shielding components and cable entry systems create secure connections for machinery and equipment may be used in a wide range of industries and applications including smart buildings and factories, machine tools, railway technology, wind turbines, solar technology, vehicle construction and packaging machines, automation and robotics.


Foremost Electronics Ltd


New Round Plastic Enclosures For IoT and Industry 4.0 Electronics


R


OLEC has launched technoDISC – a unique round plastic enclosure for industrial electronics. It is based on the firm’s successful aluDISC diecast aluminium housings. The new technoDISC cases are UV-stable and sealed to IP 66 (IP 67 optional), making


them ideal for Industry 4.0 and IoT applications both indoors and outside. The round design integrates visually when used in applications such as industrial pipework, shipboard equipment, vehicles etc. These ‘go anywhere’ enclosures can be fitted to walls, bulkheads, machines – even


when closed (protecting the seal and electronics during installation). Clip-on POM (polyoxymethylene) trims cover all the fixing and mounting screws. New technoDISC’s smart design was inspired by the shape of a wristwatch,


combining round aesthetics with flat surfaces to enable the mounting of cable glands and controls. The lid is recessed to accommodate a round membrane keypad or product label.


OKW ENCLOSURES LTD u +44 (0)1489 583858 u www.okw.co.uk


IDEAL NETWORKS TAKES TEST REPORTING TO THE CLOUD I


DEAL Networks has introduced IDEAL AnyWARE™ Cloud, a new test management system which makes managing, editing and sharing reports easier than ever for installers and technicians using LanTEK® IV cable certifiers. To make test data management even easier, the secure, cloud-


based tool can be accessed, viewed and updated on common web browsers, via PC or tablet. Registration for the free solution can be completed quickly and easily online, and users can select from a choice of nine languages. Once logged in to the IDEAL AnyWARE Cloud, the intuitive


interface provides easy access to data from the LanTEK IV. However, the platform also includes the WalkMe interactive digital help system which provides proactive guidance every step of the way, helping users to complete any key task in the AnyWARE Cloud easily.


IDEAL Networks u 01925 428 380 CONNECTINGINDUSTRY.COM/MAGAZINE u www.idealnetworks.net RTI Joins the Autonomous


Vehicle Computing Consortium (AVCC) to Help Define an Architecture for Highly Autonomous Vehicles


R


eal-Time Innovations (RTI) has joined the Autonomous Vehicle Computing Consortium (AVCC). RTI joins leading


OEMs, Tier 1 suppliers and semiconductor companies to define the architecture to develop and run highly- autonomous vehicles, and support development phases from research to production. The amount of technological innovation required to


develop highlyautonomous vehicles requires the availabili- ty of a common architecture that these systems can be based on, regardless of the manufacturer, hardware or software selected. Formed in 2019, the AVCC’s primary pur- pose is to develop a computing platform designed specifi- cally to move today’s prototype systems to deployment at scale. RTI automotive experts will work with AVCC members on interface standards, real-time communication and next generation system architecture to advance the state-of- the-art in vehicle design. RTI Connext DDS is built on Data Distribution Service (DDS) standard. Connext Drive is the first software framework that can integrate


Real-Time Innovations (RTI) u 0(20) 3887-2818 u www.rti.com


ELECTRONICS | JUNE 2020 39 u +44 (0)1371 811171 u www.4most.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46