FEATURE
FASTENINGS & ADHESIVES SOLUTION FOR BONDING MMAs - A TOUGH MMAs – Methyl methacrylate structural
adhesives – bring many process and technical advantages to applications in a range of
industries. Ben Swanson, joint managing director at Intertronics, takes a look at what MMAs are, their benefits, and properties
A
structural adhesive is one that cures into a material capable of holding two or more substrates together, bearing the forces
involved for the lifetime of the project, such as shock, vibration, chemical exposure, temperature fluctuations, or other destructive/weakening agents. Common structural adhesives are epoxies, PUs, UV curing adhesives, MMAs, and arguably cyanoacrylate adhesives.
WHAT ARE MMAs? MMAs are two-part reactive acrylic adhesives that include a resin and an activator. Mixing them together causes a free-radical reaction that enables fast curing at room temperature. Additives may include elastomeric tougheners and impact modifiers. They are typically available in two mix ratios, 1:1 and 10:1. The 1:1 adhesives generally have higher strength than the 10:1 products, but the 10:1 adhesives have higher elongation, and so more flexibility. MMAs are excellent for bonding metals
(steel, stainless steel, aluminium), thermoset composites (both carbon fibre and glass fibre reinforced), and thermoplastics (acrylics, ABS, polycarbonates, PVC, and other engineered plastics). They are favourable in applications
where fast cure speed, strength, toughness, and environmental resistance are important. Because they bond to a wide range of substrates, and have choices of cure speed, they are seen as quite versatile. Certain formulations have approvals from Lloyds and the American Bureau of Shipping, and meet FST for interior rail applications, as well as having approvals from automotive manufacturers.
PROCESS BENEFITS OF MMAs MMAs fully cure and reach their full strength at room temperature, due to the fast exothermic reaction that forms them. Their cure is less susceptible to ambient conditions like temperature and humidity than other adhesives. Critically, the time between mix/application and fixture strength (enough cured strength to allow further processing, sometimes called green strength or handling strength) is short, reducing work in progress and enabling faster throughput – a key processing advantage. To suit different process requirements, MMAs are available with a range of working times (five minutes up to 120 minutes) and fixture times (six minutes up to four hours). Typically, less surface preparation is required
when using MMAs to bond composites, metals, and plastics than when using other adhesives, as the chemistry is able to cut through some surface contamination. A solvent wipe to remove any light oils on metals or composites, or a dry wipe on plastics, may be all that is required with an MMA, although some projects will require the use of a solvent wipe or abrasion. Some MMA products are available that bond metal without the need for a primer, which creates a leaner process, removes the risk of error, and can improve health and safety. Methyl methacrylate adhesives are readily and
commonly available in two-part cartridges from 50ml to 490ml in size, and can be supplied in bulk for larger volume applications. They are applied through static mixing nozzles, which comfortably give the adhesives an adequate mix.
PROPERTIES OF MMAs Important properties for a structural adhesive are strength, toughness and flexibility. When bonding dissimilar materials, such as a rigid metal with a flexible plastic, flexibility in the adhesive is particularly important. With a crosslink density between that of epoxy
and polyurethane, SCIGRIP’s MMA technology combines high strength with good flexibility. Generally, when compared with epoxy technologies, MMAs are less brittle, less prone to cracking, offer non-critical mix ratios, large gap fills, and a flexible choice of cure speed. When compared with polyurethanes, MMAs offer high bond strength, good impact resistance, large gap fills, less environmental sensitivity, good chemical and environmental resistance, fast cure speed, and reduced health risks (no isocyanate). In metal bonding, for example, MMAs have
become a popular choice over epoxies, as they are easier to use and cure faster, whilst having enough bond strength for many applications.
DISADVANTAGES Acrylic adhesive technology does have a stronger odour than other chemistries, although all SCIGRIP MMAs have GREENGUARD certification for low VOC and chemical emissions. MMAs have lower operating temperature ranges than, say, epoxy adhesives. In some cases, where there is larger adhesive mass or thicker bond lines, understanding of the exothermic heat produced during fast cure is required to avoid potential substrate discolouration or distortion. There is no perfect or universal adhesive, and the benefits and disadvantages of each chemistry should be weighed up against the demands of the application and processing environment. MMAs, however, may be a good candidate to trial when reviewing structural adhesive chemistries.
Intertronics
T: 01865 842842
www.intertronics.co.uk
38 DESIGN SOLUTIONS NOVEMBER 2024
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
