DRIVES, CONTROLS & MOTORS PRODUCTS DRIVE KEEPS THE DRINKS FLOWING
From its facility in Shepton Mallett, contract packing company Framptons processes around 1.5million litres of fruit juices and milk-based drinks each year. The company, however, needed to find a drive to replace an obsolete unit, but the new one needed to fit into the existing cabinet. ABB Value Provider APDS recommended the
ACS480 general purpose drive from ABB. Being compact and with a low power rating range (0.75
to 22kW), this is an ideal fit for the size of fans, pumps, mixers, conveyors, and compressors most commonly found in the food and beverage industry. The drive is facilitating more consistent end-product quality by
applying closed loop control to the blending process. As the soft water pump feeds four blending cells, it is critical that the water pressure to any one of them remains constant, regardless of how many cells are activated. The closed loop control is provided by a PID controller. This is included
in the VSD software, which is inserted within the control loop so that the loop can be tuned to ensure stable and accurate control with good response times. PID control is used to control a range of parameters such as flow and pressure. The PID controller then determines the optimum speed at which the pump’s motor achieves the correct water flow rate. A pressure transducer in the water tank feeds a signal to the VSD; and
as the pressure of the water varies, the pump’s speed is adjusted accordingly. This provides a constant flow of water into the system, ensuring the fruit juices are mixed to the right consistency every time. Of additional benefit, the VSD’s intuitive control keypad offers Framptons
more intelligence on the process. The keypad allows the user to customise the display to show key parameters such as water pressure, flow rate and energy savings in money, kWh or CO2
to 21 selected parameters, which can be displayed in various formats. ABB
emissions. The keypad can hold up
www.abb.com
ROBUST AND DURABLE SWIVEL JOINTS PROVIDE 360˚ MOVEMENT
Rotaflow FV manufactures a range of robust and durable Swivel Joints which are designed to provide 360˚ movement through a clear bore to transfer fluid under pressure without leakage from a static position to a moving point – ideal for loading arms or removing the twist in hoses. Single-flow and multi-point swivel joints are available in carbon steel and 316 SS. Sizes are 1
/4
Rotaflow FV T: 01633 735003
sales@rotaflow.com
www.rotaflow.com
DESIGN SOLUTIONS | JUNE 2020 31 in to 40in nominal bore, with a choice if seals available for maximum compatibility.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44