PUMPS, WASTE MANAGEMENT & WATER TREATMENT
Legionella control for architects and building engineers
Water for building organisms; therefore, measures must be taken to guard against encourage the growth of water-borne pathogens such as legionella. consultant at the Water
T
o avoid potentially costly remedial works, the design of new buildings and their water systems should be controlled to ‘get it right the first time’, essentially to ‘design out’ risk, which in turn will lead to a safer water system having had the correct design, installation, commissioning, maintenance and operation.
Legionella risk in hot and cold water systems
The principal designer must understand their responsibilities concerning the control of potential water-borne pathogens, including Legionella, when designing hot and cold-water systems; whether they are for a new build, or refurbishment works of an existing building. During the design process, the responsibility for water safety, alongside all design health and safety matters under the Construction (Design and Management) Regulations (2015), belongs to the principal designer. They are required to correctly plan, manage, and coordinate the design works and any construction work that may be required.
The planning and design of water systems that are to be incorporated into a project, whether a new build, refurbishment, or extension of an existing system, can be a long and complex process. All engineering and building standards must be met at the initial design stage. Key documents that give some direction in this field are:
• Approved Code of Practice (ACOP) L8 – Fourth Edition
• HSG 274 – Parts 1 – 3 • HTM04-01 – Part A
(Healthcare Environments)
• COSHH Regulations 2022 • HASAW Act 1974 • CDM Regulations 2015
Principal designer
Projects and designs will differ hugely in size and complexity. Some may be a simple change of use of a room whereby a wash hand basin is being added or at the other end of the scale we may have a new hospital wing or department. That said, equal care and consideration must be given to each project, regardless of complexity, to ensure that potential risk is not introduced from water-
borne pathogens. If inherent risk is unavoidable, it must be As Low As Reasonably Practicable. (ALARP)
The principal designer is responsible for:
• Developing a clear brief of the water system design, taking into account input received from those responsible for water safety including your Water Safety Group (WSG).
• Ensuring that the specification for the installation and the construction project (i.e., Project Specification) meets the requirements of the original design and requirements of the Water Safety Plan.
• Preparation of:
• Project specification and project / legionella sampling plan for approval by the WSG.
• Commissioning brief for approval by the WSG.
• Documentation of the project water / legionella risk assessment, identifying the water-related risks during the installation, commissioning, maintenance and operation phases of the installation at agreed time intervals.
• Preparation of detailed method statements describing the measures required to control those risks.
There must be open and direct dialogue between the principal designer, stakeholders, the Water Safety Group (for healthcare environments) and end users to ensure the new design will provide the required water quality for its intended purpose.
All those involved in the design of water systems, for any sized project, should undertake legionella training from a
16 BUILDING SERVICES & ENVIRONMENTAL ENGINEER NOVEMBER 2024
recognised service provider. If those involved in planning and design are aware of the risk from water-borne pathogens, it becomes easier to avoid those risks in the first instance, avoid them in the future, and at least put mitigation in place to manage residual risks to acceptable levels.
Conclusion
Getting it “Right First Time” can be a lengthy and challenging process. It is much harder to rectify problems once the project is completed than it is to “design out” any issues at the design stage or rectify issues identified during the construction phase. Everyone involved in the design process must be aware of the potential risks associated with water-borne pathogens and understand their role and responsibilities within that design team. Communication is key… it’s good to talk!
Read the latest at:
www.bsee.co.uk
To avoid
remedial works, the design of new buildings and their should be controlled to ‘get it right the to ‘design out’ risk, which in turn will lead to a safer had the correct commissioning, maintenance and
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54
