Cases & enclosures M
ETCASE’s premium TECHNOMET-CONTROL enclosures can now be specified with a mounting bracket (accessory) for poles
and masts 50 mm or larger.
Applications include HMI, panel PCs, industrial control, factory processing, security systems, test and measurement, point-of-sale terminals, IIoT and detection equipment.
The new pole mounting bracket fits the standard VESA mounting holes on the rear panel of all sizes of TECHNOMET-CONTROL. It is manufactured from mild steel CR4, is powder coated traffic white (RAL 9016), weighs 0.5 kg, and is supplied with four M4 x 6 mm fixing screws. Four slots allow plastic or metal straps to be used to secure the bracket to the pole or mast.
TECHNOMET-CONTROL is suitable for mounting displays by Siemens (KTP400 to TP1200), Turck Banner (TX705 to TX810), Beijer (X2), Beckhoff, B&R and other manufacturers. These smart aluminium enclosures feature a modern, cohesive design. Diecast front and rear bezels fit flush with the main case body for a smooth appearance. Inside, there are M3 PCB pillars on the rear panel. M3 holes and guide rails in the assembly extrusions accommodate internal plates. All panels have M4 pillars for earth connections. TECHNOMET-CONTROL can be specified in four sizes from 230 x 180 x 95 mm to 420 x 300 x 95 mm. In addition to the pole mounting bracket, accessories also include front panels, internal mounting plate kits and wall mounting kits. METCASE can supply TECHNOMET-CONTROL
POLE-MOUNTABLE HMI ENCLOSURES
fully customised. Services include custom sizes (heights, widths, depths), custom front panels, CNC machining, fixings and inserts, painting and finishing, and photo-quality digital printing of legends, logos
and graphics. METCASE
www.metcase.co.uk T 30
COLOUR PRINTING ON ENCLOSURE COMPONENTS
he “Everything but the Enclosure” people at EMKA have made life a little bit easier for specialist enclosure and cabinet builders – they can now offer standard two-colour pad printing onto swinghandles, drawing pockets, air conditioning handles, drawer
handles, L handles, T handles and even hinges as required. This service supports safety regulations, operation instructions and simple information provision to aid H&S goals – plus enhancing ease of operation, while it provides branding information
for service and operational needs. Typical print requirements include corporate presentation, e.g. logos etc., safety information, operational directions (pull, push, rotate, slide down, engage A before B etc.), also technical information e.g. 400VAC etc. or other design graphics to supply important points of operation data.
While two-colour printing is standard, more colours are possible to special request.
EMKA
www.emka.com February 2025 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
