ATEX & hazardous areas
DRIVE SYSTEMS FOR HARSH ENVIRONMENTS
During the construction of the Eiffel Tower, engineer Gustave Eiffel noticed the tower could be used as a giant thermometer. Due to the structure expanding and contracting with temperature changes, its height can vary by up to 15cm. This engineering quirk demonstrates the impact of temperature extremes on industrial structures. However, in today’s complex industry settings, temperature is just one of many engineering considerations. Here, James Chester, director at Technidrive, explains how the right systems integrator can help to navigate these complexities.
E
nvironmental conditions can wreak havoc on the longevity of motors and gear units. From extreme temperatures and corrosive substances, dust, moisture and vibration, the environment can put a significant strain on equipment. As a result, engineering appropriate drive trains can be extremely challenging. Plus, many end users are not aware of these unique requirements when commissioning a system. Among the most common challenges is fluctuating temperatures. Whether extremely hot or cold, this variation can lead to thermal stress, affecting the lubrication and performance of motors and gear units. Continuous operation at either end of the temperature spectrum can also cause damage — whether that is the extreme heat of operating in an oil refinery, or operation of a motor in a consistently sub-zero environment, like that of a cold storage facility.
Moisture and humidity also have an impact. Ideally, an integrator would have prior experience of drive systems that operate in a similar environment, or the technical knowledge to advise on the correct materials selection. Does the system need to be resistant to corrosion and rust? If so, the integrator may specify using corrosion-resistant coatings or specialised alloys in the construction of motor casings, drive enclosures and gearbox housings. Ensuring that cable entry points, shaft openings and other potential entry points are properly sealed is also crucial. This is an area that is
22
often missed when end users integrate systems themselves. Calling on a professional with knowledge can ensure cable entry points, shaft openings and other potential entry points are not exposed to moisture — minimising maintenance and repair headaches in the long run. In fact, systems integrators like Technidrive can guide equipment selection based on ingress protection (IP) ratings, ensuring that the chosen components meet or exceed the required level of protection against containments. For example, an IP65-rated motor can withstand water jets and dust ingress, making it suitable for harsh conditions in industries like pharmaceutical and food production.
TESTING AND PERFORMANCE Systems for harsh environments should also be tested against the conditions they will face in the field. As well as the aforementioned environmental conditions, a system will be exposed to vibration, shock loads and wear and tear throughout its operational lifespan. With each project Technidrive completes, we use our experience to ensure the system is built to last.
Even with the best preventative measures, drive systems will require maintenance throughout their lifespan. A systems integrator can support this in several ways. As standard, Technidrive’s engineers provide a comprehensive suggested maintenance schedule. For users that want more reassurance, there are also options to incorporate remote
monitoring technology within the system. Using a combination of sensors and data capture technology, these tools provide operators with real-time data on environmental conditions and equipment performance. In an extremely hot environment, like an industrial bakery, this could measure the temperature. The system will then generate alerts and notifications when predefined thresholds are crossed. Let us say a motor surpasses the safe temperature limit, the bakery’s maintenance team will be informed immediately, allowing engineers to make adjustments or repairs to avoid downtime or stoppages. This technology minimises the likelihood of expensive unplanned downtime and can also yield major safety benefits. This is particularly important since many harsh environments are also hazardous — think bakeries, oil and gas facilities, pharma and mining. Choosing a systems integrator that understands the challenges and regulations of harsh and hazardous environments is crucial. The height variation of Gustave Eiffel’s tower seems pretty minor in comparison to the engineering challenges faced in industry. Integrating a drive train package is incredibly complex and leaning on the expertise of an experienced systems integrator is even more important in extreme environments.
Technidrive
technidrive.co.uk February 2025 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
