Connectors & cables
From the cabinet to the field b
inder has introduced new control cabinet feed-through connectors for the m12 product series 713, 813, 814, 823 and 824, which are available with different codings and pin counts. The m12 or m12
power type components - in accordance with the Din en 61076-2-111 standard - allow signal, data, and supply cables to be connected using circular connectors of the same type from the respective series. They are equipped with an m12 locking thread and an m16 mounting thread.
Rugged, space-saving, Reliable – M12 and M12 poweR The increasing degree of automation of industrial plants, driven by the trend towards digitalisation and integration in the context of Industry 4.0, is generating a growing need for powerful yet space-saving and robust connection solutions for signals, data, and electrical power. M12 connectivity offers efficient, reliable, and cost-effective cabling of fieldbuses, sensors, and actuators in the field l of automation technology. Using these standardised, robust connectors, complex installation concepts can be implemented in industrial environments - e.g., in smart factories - starting from the control cabinet and covering the entire shop floor. The compact design supports applications in confined spaces.
Flexible installation in autoMation technology In order to ensure the reliable flow of signals, data and electrical power between the control, communication and power modules within the control cabinet as well as the automation components in the field, M12 and M12 Power feed-throughs are indispensable components. The new binder products are available with A, S, K, L as well as T coding and, depending on the coding, with four to eight pins. In addition, various coding positions can be realised. The coding on each
connection side - together with the possibility of freely combining plugs and sockets - ensures the greatest possible degree of freedom during installation.
the pRoduct seRies and theiR speciFications The technical data of the feed-through connectors, such as protection degree, rated voltage and current, contact resistance, and others, vary from series to series according to the specifications of the respective binder M12 and M12 Power circular connectors. In general, this means that the products meet the requirements of protection degree IP67 and
achieve a mechanical lifespan of >100 mating cycles (excluding 713 series). They are designed for operating temperatures between -40 °C and +85 °C (814 series: -25 °C to +85 °C). In detail, the following specifications apply to the control cabinet feed-
throughs: In the case of 3-pin to 8-pin A-coding (713 series), the rated current and voltage depend on the wire cross-section of the corresponding connector and are 2 A at 30 V (8-pin, up to 0.5 mm2 60/250 V (5-/3-pin, 4-pin up to 0.75 mm2
, AWG 20) and 4 A at
impulse voltage is 800 V and 1,500/2,500 V, respectively. The mechanical lifespan is specified as >100 mating cycles (8-pin, up to 0.5 mm2 or >50 mating cycles (5-pin, 4-pin and 3-pin, up to 0.75 mm2
, AWG 18), respectively. The rated , AWG 20)
, AWG 18). The control cabinet feed-throughs of the 4-pin T-coded 813 series are
specified for a rated current of 12 A at 63 V(DC). The rated impulse voltage here reaches 6,000 V. For the S-coded 814 series, the rated current, voltage and impulse voltage are specified as 16 A (pin count 2+PE, PE - Protective Earth) and 12 A (3+PE) as well as 630 V and 6,000 V, respectively. The 823 series with L-coding - pin count 4+FE (Functional Earth) - is
specified for 16 A at 63 V(DC), for 1,500 V rated impulse voltage as well as with ≤5 mΩ. The corresponding circular connectors of this series have been designed for wire gauges/cross-sections of 1.5 mm2 16) with ferrule or for 2.5 mm2
(AWG (AWG 14) without ferrule. The feed-throughs of the K-coded 824 series are available with 3+PE pins.
They are rated 12 A at 630 V and withstand impulse voltages of up to 6,000 V. binder
new COnneCtOr pOrtaL:
ODU COnneCtOrs LaUnChes ODU COnneCts o
Du connectors has introduced a new microsite at
odu-connects.com. This new portal is designed to operate as
a knowledge hub, providing technical expertise direct to oDu customers. Design engineers, quality managers,
project managers, procurement staff and all enablers will be able to benefit from the ability to get advice at any time, any place, from oDu’s in-house experts. The coviD-imposed restrictions of
the last 18 months have caused oDu to strive for new ways to provide their customers with the best possible and most timely support.
18
The microsiTe makes four opTions available:-
a large media library of technical video presentations, free to view at any time.
a calendar of up-coming virtual presentations and exhibitions available for log-on.
The option of booking a live, digital webinar for one-on-one or group discussions with oDu engineers having specific market and technical expertise.
a link to personal support.
binder
www.binder-connector.com
September 2021 Instrumentation Monthly
www.binder-connector.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74
