Predictive maintenance & condition monitoring Ultrasound for bearing inspection

Pierre Langevin patented the first technological application of ultrasound during World War One by inventing a device to detect submarines. Like Langevin, maintenance engineers and plant managers can also use ultrasound for detection. Either by itself or as a companion technology, ultrasound can be an excellent part of condition monitoring for your bearings. Here, Chris Johnson, managing director at specialist bearings supplier SMB Bearings, provides an introduction into some of the benefits of this technology

analysis has been a popular option and infrared technology has also been used. Ultrasound, however, offers unique benefits that make it an especially useful tool for condition monitoring. Ultrasound refers to high frequency soundwaves outside the range of normal human perception, typically in excess of 20 kilohertz. In the natural world some animals, like bats and porpoises, use ultrasonic detection for hunting prey. In industrial applications however, ultrasonic detection devices can allow maintenance engineers to ‘hear’ sounds that would otherwise be inaudible, including ultrasounds made by faulty bearings. Ultrasound devices translate these noises into the audible range through a process called heterodyning. Ultrasound technology is arguably better than


more traditional bearing inspection methods at identifying problems at the earliest possible stage and crucially, pinpointing the precise location of

here are many ways of monitoring the condition of bearings and identifying potential defects. Traditionally, vibration

the fault. Sounds in the ultrasonic range have short waves, making them easier to separate from background noises like the normal running of machinery. The short waves do not spread out as rapidly, making it easier to identify the origin of the sound and therefore the location of the problem. These factors make ultrasound extremely effective at providing early detection and intervention. Another undeniable advantage of this technology is its ability to monitor slow moving bearings. For all its benefits, vibration analysis is known to have limitations for bearings at lower speeds and as a general rule, these limitations increase the closer you get to zero revolutions per minute. If you are using slow moving bearings, ultrasonic sensors are more effective. Ultrasound is also especially well-suited to identifying problems with lubrication. Research has shown that four out of every five cases of bearing failure can be attributed to problems with lubrication. When read with an ultrasound detection device, a properly lubricated bearing will provide a uniform reading. In the case of over lubrication, very little ultrasound will be picked up. For under lubrication, ultrasound will spot or ‘hear’ the problem before vibration analysis or infrared technologies that identify heat.

Ultrasound can therefore be used for condition-based maintenance, meaning relubrication can take place when a problem exists rather than being done automatically after a set period of time. As ultrasound identifies problems at such an early stage, there is also less need for interruptions to carry out relubrication. The early warning means the work can be carried out within the time put aside for pre- arranged maintenance schedules. Furthermore, ultrasound technology can allow technicians to better learn when to lubricate and how much lubricant to apply. Further benefits of ultrasound include its ease

of use, affordability, and versatility. Use of these devices does not require extensive training and they tend to be quite lightweight and portable. Ultrasonic detection can also be used for other maintenance tasks, like identifying leaks for example, making it a multifunctional and worthwhile piece of kit. For maintenance engineers and plant managers, bearing faults can torpedo productivity, leading to costly unplanned downtime and hefty repair bills. Like Langevin, engineers can use ultrasound to detect the enemy — in this case a fault with their bearings.

SMB Bearings


October 2020 Instrumentation Monthly

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74