ADVERTORIAL TECHNOLOGY IN ACTION
New AMD Decking Fixing from Lindapter
Deck Ltd. The new CE marked fixing creates genuine efficiencies
D
for the contractor as it is installed within seconds and is adjustable onsite without the requirement of specialist labour, expensive tools or power. The Lindapter concept delivers an economical
connection method suitable for the installation of a variety of HVAC systems, fire protection, pipe work, electrical equipment and lowered ceilings. The AMD wedge is designed to fit inside the dovetail re-entrant channel of the composite decking profile and held in place by a locking plate and locknut. In contrast to shot firing methods, this zero-impact fixing preserves the strength of the decking profile and avoids or damage to the deck.
Lindapter 01274 521 444
www.lindapter.com
The fire-resistant cleats for larger cables have been added to SWA’s successful Firefly range, which already includes fire-resistant metal clips for small cables and clips for plastic mini trunking. All Firefly fixed and adjustable cleats meet BS 7671 (18th Edition) requirements aimed at stopping wiring
S
collapsing in a fire. SWA Marketing Manager Colin Fletcher said: “It’s tragic that lives have been lost because people have become
entangled in fallen cables. At SWA, we are proud to play our part in making sure this never happens again with our new Firefly Cleats.” Previously, metal clips were only compulsory on escape routes, but Regulation 521.10.202 states that all cable must be protected against “premature collapse”. Impact-resistant and corrosion-resistant, Firefly cleats are easy to install, supplied in sizes matching existing No.
5 to No. 20 plastic cleats. SWA
01453 844333
New DAQ module with CAN FD for increased bandwidth requirements demanded by the automotive industry
T
est and measurement expert HBM has expanded its range of data acquisition modules by launching the new MX471C module with CAN FD
(CAN with flexible data-rate) protocol. The module is part of the industry standard’s QuantumX family, providing engineers with universal and flexible solutions for integrating data acquisition systems into CANbus networks. CAN FD solves the bandwidth limitation problem of classical CAN networks by allowing bit-rates higher than 1 Mbit/s. In addition, it supports payloads in CAN FD messages up to 64 bytes. Many automotive companies
make use of this increased bandwidth at low cost which is especially required in today’s electric vehicles. The MX471 CAN FD module allows the synchronous integration of up to four CAN networks and can be expanded as required. The module, combined with a data recorder and analog measurement modules, is ideal for mobile vehicle tests and as a measurement gateway in test benches.
HBM 020 8515 6000
www.hbm.com
YOUR PARTNER IN FIRESTOPPING: QUELFIRE AT FIREX INTERNATIONAL 2019
International 2019, taking place on 18-20 June at the ExCeL, London. Quelfire has built its name on a long-standing commitment to high-
L
quality certified products, including fire containment systems for pipe, duct and electrical service penetrations, as well as linear joints and cavity barriers. With over 40 years’ experience in the industry, the company provides a range of valuable products and services to firestopping contractors, specifiers, architects, engineers and main contractors, which visitors to the stand can learn more about at FIREX International 2019. The company’s core QuelStop Firestopping System, a ‘one-stop-shop’ aimed at specialist firestopping
contractors, will be on display at the exhibition. Quelfire
www.quelfire.co.uk. 34 MAY 2019 | ELECTRICAL ENGINEERING
eading manufacturer and supplier of specialist passive fire protection products, Quelfire, will bring its expertise to stand FX239 at FIREX
T
www.swaonline.co.uk
eveloped to allow building services to be suspended from decking profiles manufactured by Anglian Metal
SWA Cleat range meets new 18th Edition regulations
WA has launched a range of all-metal Firefly Cleats that fully comply with new rules designed to save the lives of firefighters and others escaping a burning building.
EMERGENCY STOP and RESET buttons
he EMERGENCY STOP and RESET buttons from Murrelektronik are integrated in electronic installations
using preconfigured M12 standard cables. A time-saving solution that reduces the risk of faulty wirings. The 'Plug & Play' feature makes integrating the command devices in machines and systems faster. They are used whenever individual command and signalling devices are included in decentralized systems, for example on protective fences or at production stations. The versions with an ultra-compact width of 42 mm are perfect to connect to standard aluminium profiles. Murrelektronik has a version of the EMERGENCY STOP
button with an illuminated RESET button in the housing. It can be integrated into the installation solution in such a way that the button is illuminated when a restart is possible. Five coloured button caps are included in each packaging which allow you to create the desired coloured lighting effect.
Murrelektronik 0161 728 3133
www.murrelektronik.co.uk
CONNECTINGINDUSTRY.COM/ELECTRICALENGINEERING
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
