ADVERTORIAL TECHNOLOGY IN ACTION


Ensuring you have the right Diamond Blade for the job N


orton Clipper’s Diamond Blades have been used by contractors across the globe since the 1980s. The brand’s extensive range of diamond


Switchtec’s enclosed switch disconnectors are available in GRP or Mild Steel Enclosures


being supplied in either GRP or Mild Steel enclosures, the addition of GRP Enclosures to the range offers improved performance and greater product flexibility at competitive prices. Aimed at electrical contractors, panel builders, equipment manufacturers, machine builders and generator set manufacturers, the switch disconnectors provide a solution where general switching duties are required. They are suitable for control switches for multiple circuits and for use in main circuits as load break switches for motors, machines, heating equipment, lighting, ventilation, air- conditioning, generator sets and mains/generator change over duties. Three types of enclosed switch are available, on/off load break, on/off switch fuses and on/off/on change over switches. Fitted with high quality Telergon switches, the packaged enclosures are available in ratings from 32Amps to 1250Amps ex-stock, with other sizes available to order. Supplied in enclosures with lots of internal space.


S


Switchec  01785 818600  www.switchtec.com


witchtec’s NT enclosed switch disconnectors offer improved performance at a competitive price. Now


blades are designed to tackle all kinds of applications and materials – each and every one tried, tested and trusted. The wide variety of products within the range are each tailored to specific materials and applications, in order to guarantee maximum performance. To help contractors quickly and easily choose the correct blade for their project, the packaging and blades of Norton Clipper blades are colour coded as follows, in order to help identify which materials the blade can be used for: The diamond blade range also offers a clear choice of three product performance levels for every job requirement, helping contractors choose a product that suits their budget and matches the level of performance and longevity they require.


EDSONEVERES  01785 25 5146  natalie.isherwood@edsonevers.com


ELLIS SECURES SECOND GULF COAST REFINERY ORDER TEN YEARS AFTER FIRST


T


he world’s leading cable cleat manufacturer, Ellis Patents has secured a repeat specification from a major Gulf Coast refinery ten years after its cleats were


used on the refinery’s first substation. Ellis’ Vulcan+ cable cleats were ordered by Houston, Texas-based Dashiell Corporation to secure two 68kV armored cable circuits. Kelly Brown, Ellis’ export sales manager, said: “We’re renowned for designing and manufacturing truly world class cable cleats, which always meet the exact specification requirements of any project. “As a result we deal with a lot of businesses time and again, but to have someone come back over a decade after placing an initial order really does show the quality of the products we make in Yorkshire and export around the world.” Manufactured in 316L stainless steel, Ellis’ Vulcan+ cleats are designed to provide ultimate corrosion protection, even in the harshest of environments, while also ensuring cables remain secure and operational following a short-circuit incident.


Ellis Patents  01944 758395  www.ellispatents.co.uk


A small price to pay for peace of mind


The single gang unit is installed between the Hob and the cooker isolator switch, at a convenient location for those preparing food, and ensures that hobs cannot be left on should the cook be distracted.


P


This version of Hobsafe has the same features as the popular 2 gang versions but is more compact. The capacity of the unit is 30Amps with 15, 20, 30, or 45-minute run-times being selectable during installation. There are both a neutral feed terminal and a neutral output. These large (13.3mm) terminals make fixing easy and quick - eliminating the fiddly issue of doubling up two cables into one terminal.


There are two modes of operation, Fixed – when the timer runs its course, or On/Off – where a second press of the button allows the time-run to be stopped at any point.


Hobsafe is easy to use with simple button operation and clear LED indicators, which are dimmable. When the current time-run is about to expire, the red ‘hob active’ LED will flash to warn that the hob is about to be turned off, giving the operator the opportunity to reset the timer if necessary.


Hobsafe conforms with EN60730 and is moulded in PC/ABS making the timer extremely durable. PC/ABS is fully UV stable and is resistant to cleaning products. A gloss finish overlay allows for easy cleaning.


Prefect controls are also able to install Hobsafe – providing a one stop peace of mind service for student accommodation managers, safety conscious landlords, and care partners of those living with dementia. Prefect Controls


 01787 320604 46 FEBRUARY 2020 | ELECTRICAL ENGINEERING refect Controls are pleased to announce the arrival of a new member to the Hobsafe family, the PRE 9276.


 www.prefectcontrols.com CONNECTINGINDUSTRY.COM/ELECTRICALENGINEERING


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53