Company insight
the Cold War and are in dire need of replacement. Waring provides an example, noting that the Polish armed forces have been potentially looking to purchase US M1 Abrams main battle tanks to replace their aging fleet. CTG are a prime source of repair parts and supply to GD Land Systems, the prime supplier of M1 tanks. CTG also provides parts for the F-16 and the F-35 fighter jets, among others.
The threat of counterfeit electronics Supply chain issues and a global chip shortage have led to concerns over counterfeit electronics entering the defence supply chain, potentially threatening the working of mission- critical defence equipment. “We’ve actually proven this practicality that [counterfeit goods are] entering the supply chain through once-trusted supply sources,” says Stephen Clark, senior director of operations at CTG, citing budget constraints caused by the pandemic as a major cause in suppliers circumventing rules and regulations.
As a result, the need to trust who you’re working with has rarely been higher. CTG uses a holistic approach in how it manages supply chains, partnering with preferred suppliers, preferred vendors and test houses, as well as possessing its own internal capabilities, in order to ensure that the products it sources can be depended on. “We try to stay away from Chinese supply sources as much as possible, with Shenzhen being the ‘counterfeit capital of the world’,” Clark explains. “We see a lot of components coming from there, we see a lot of test
houses and test reports coming from there, we see a lot of DoD, or FMS, or even commercial items coming out of there, that were sold once in the US, entering the supply chain.”
The chip shortage has brought a whole new facet to the counterfeit game, he continues. Once, components were easily produced, and they were cheap and readily available – those same components are now difficult to locate and to source. At the same time, there has been a surge in inflation and rates due to these constraints on supply and demand.
Due to this shift in the market, parts that once would never have been counterfeited are now suspect, as it’s become more lucrative to produce said counterfeits. The danger, as Clark points out, is that the end use of many of these components that CTG has intercepted has been US DOD customers. As the reward in counterfeiting these goods has increased, so too has the skill of the counterfeiters – many of the counterfeits that CTG uncover are better looking than the obsolete components the company receives from military surplus sources that could trace back to their manufacturers, according to Clark. Therefore, CTG have had to implement a wide range of strategies in order to detect these counterfeits. “We look at the traceability documents, we look at who we’re buying it from, how did they procure it,” Clark explains, as the company’s starting point. When dealing with an electronic component, CTG will take it to its lab and X-Ray the object. It will examine the polymers of plastic components to ensure
they’re homogenous throughout, while also checking the buoyancy of solder to verify age. The company will even go as far as to destroy the components and see if the dye on the inside matches the manufacturer’s, using CTG’s connections with manufacturers to gain confirmation of authenticity against known good or golden samples.
Detecting repackaged obsolete parts Of course, counterfeits aren’t the only thing that CTG tests for. “Some counterfeiters will pull obsolete components off of used military hardware,” Clark explains. “Taking a potentially bad part, [which] could have a latent failure – it could work and test but once it’s put into action, you could have intermittent faults and failures.” To circumvent this, CTG performs upscreening with a test house that it’s partnered with, where it subjects these components to temperatures from -50 degrees centigrade and to 150 degrees centigrade. “CTG’s philosophy is overtest, so we want to actually upscreen further than the requirement of our end user,” Clark says. “If our end user is using a military spec, or their own internal spec, we’ll actually dictate to our test house to go well beyond that, so we can test at our full capability.” In the wake of Covid, the industry has seen a considerable amount of unauthorised sources selling spare parts for use in aviation, Clark alleges. These are not necessarily counterfeiters, but often smaller distributors bypassing the correct rules and regulations as they’re struggling to survive the pandemic. And so, in order to provide greater oversight and reliability, CTG have partnered with local FAA officials to do periodic checks of components. The company’s quality team is certified through the American Society of Quality, and it partners with the FBI and local law enforcement, and with industry sources, to monitor the presence of counterfeits in the areas that it operates. CTG also works to verify trace and manufacture, and even check in with manufacturers to confirm their authorisation to sell the parts in question, in order to ensure that any component that comes with its stamp of approval can be trusted and relied on. ●
Supply chain issues and a global chip shortage have led to concerns about counterfeit electronics potentially threatening mission-critical equipment.
Defence & Security Systems International /
www.defence-and-security.com
www.ctg123.com 13
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45
