| 57
to include a resawing machine from EWD. “This means that it is now possible to cut the entire log to size for our pallet production,” continued Mr Elzén.
“Kallfass understood how we work and which process is best for our plant, and offered a technical solution for our requirements that we liked,” explained Mr Nilsson, who is the third generation of his family to run the company.
SPACE AND TIME - TWO CHALLENGES The building in which the new sorting and stacking facility is housed dates back to 1956. This has recently been expanded somewhat. “However, we had to make do with the available space for this extensive project and utilise every millimetre,” said Dominik Hauser, who supervised the project on behalf of Kallfass. “During installation there were even bets as to whether the robot would actually have enough space for its intended function without having to make any adjustments to the building. However, the robot was commissioned as planned.” He is referring to the robot that is responsible for automatically filling the moulding magazine. But more on that later. In addition to the available space, there were other points to consider: Initially, a large part of the installation was carried out during ongoing operations. “We only had six weeks of downtime,” said Mr Elzén, adding that the roof could not be removed during installation.
“Thanks to the co-operation of everyone and the high level of flexibility on the part of Kallfass, we were also able to master this,” said Mr Nilsson, who is very satisfied with the mechanisation specialist’s handling. Assembly began in March and the sorting system for the main and side products has been in operation since the beginning of August.
COMPLEX MECHANISATION Kallfass supplied the mechanisation with transverse take-off, rising diagonal conveyor as well as cycle-in and thickness measurement between the existing sawing line and the new EWD resawing machine. “Before the resaw, there is the option of transporting the main product to an existing stacking system via an automatic take-off device, depending on the dimensions, output, adjustment or maintenance work on the main line,” said Mr Hauser.
In addition to a direct side product infeed, a stock edger is located under the new main product infeed to the resaw, which also feeds the boards for sorting. Each of the three feeders has its own buffer level.
“The main goods are buffered on one deck and the side goods on two decks,” said Mr Hauser. “When a floor is full, it is emptied automatically so that the sawing line does not come to a standstill.”
Above: ...and a robot that fills the magazines of the stacking system
A level changer takes the boards to the top. The goods are first aligned there before the Tongloader cycles them into the carrier conveyor at a rate of up to 120 parts per minute. There is also the option to cut back at zero line.
After another level change downwards, a Microtec scanner recognises the wanes and gives each board the corresponding quality or dimension. These are then placed in one of the 15 vertical boxes. The boxes are emptied downwards onto a chain conveyor, which transports the box contents further onto a traversing chain conveyor feeding the timber to the parallel stacking system. “This solution was also due to the space available,” said Mr Hauser. A step separator and an unscrambler transfer the boards to another cross conveyor for layer formation. The Kallfass project manager estimates their output at up to 14 layers per minute. The downstream multiple cross-cut saw from Kallfass is equipped with four saw aggregates – three of which can be positioned automatically. The layers of boards are then transported to the stacking machine, which has six magazines with automatic strip placing.
Above: Kallfass supplied an automatic stick feeding system to ensure a high degree of automation …
HIGH DEGREE OF AUTOMATION The robot mentioned above fills the stick magazines. Kallfass installed an automatic feeding system for this purpose. A forklift driver places the stanchions filled with sticks onto a conveyor, from where they are fed into the system. Two different types of sticks can be fed separately via a hoisting unit. After the stanchions are emptied, the sticks are fed to the scanner via a step separator and unscrambler. The scanner checks the timber for dimensions and damage and unsuitable sticks can be automatically ejected. This is followed by the formation of bundles, so the robot can grip several strips at once and fill the magazines.
Kallfass also supplied the automatic pallet feeder for the stacking system. The number of pallets required can be determined according to the length of the timber. The empty pallets are automatically removed from the magazine and pre-positioned so that the pallet is always in the centre of the work piece length. The layers of boards are then automatically stacked on pallets. The maximum stacking height including pallet is 1.9m. Mr Hauser specifies a target output of up to 90 packages per day.
Thanks to the high degree of automation, Åsljunga Pallen is able to operate the entire sorting and stacking line with just two employees. “We are currently carrying out the final optimisations,” said Mr Nilsson. “Then we expect an increase in performance of at least 20%.” ■
www.ttjonline.com | September/October 2024 | TTJ
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105
