DECEMBER 2022 | LEEA GUEST COLUMN


NEW GUIDANCE ON CARE AND USE OF LOAD-MEASURING DEVICES


I


Technical Committee


Obligations around the use and care of load cells and other measuring devices take more than an up-to-date calibration certificate, writes Ben Dobbs, head of technical services at the Lifting Equipment Engineers Association. A newly published guidance note explains why…


n our work auditing users of lifting equipment, the Lifting Equipment Engineers Association (Leea) has found a widespread misunderstanding about the legal obligations around the use and care of load cells and other measuring devices. In a surprising number of firms, including Leea members, it seems to be believed that all that is required is an up-to-date calibration certificate. This is not the case, and Leea’s newly published guidance note – LEEA 085 Guidance to the Use and Care of Load-Measuring Devices – explains why. As should be universally known, lifting equipment is covered by both


UK regulations and EU directives detailing among other things the nature and frequency of inspections and examinations that the duty holder is required by law to ensure are carried out and documented. Where load-measuring devices are integral to the lifting apparatus there shouldn’t be a problem – obviously they will be inspected or thoroughly examined along with the rest of the apparatus. But in many cases the load cell or


equivalent isn’t part of the apparatus itself – it is, to quote the regulations, “a component or equipment not attached to the lifting machinery, allowing the load to be held, which is placed between the machinery and the load or on the load itself”, which is the definition of a ‘lifting accessory’, and lifting accessories are also subject to regulations on inspection and examination. Note that this applies whether the device is used for live load monitoring or for loose load testing of equipment, both of which involve actual lifting operations. Devices used purely for the tensile or compressive testing of lifting equipment aren’t technically classed as lifting equipment but are still covered by the UK Work Equipment Regulations where they apply and rules around guarding, safety devices, risk assessments and the like. The range of devices involved is


quite wide. There are both tensile and compressive load cells, load pins and shackles, all of which will typically give an electronic read-out; hydraulic systems; and simpler mechanical spring scales or ‘load clocks’ (which aren’t considered further in the guidance). All these devices must observe


R Ben Dobbs 24 | December 2022 | www.hoistmagazine.com


regulations both for calibration (are they reading correctly and thus not allowing a risk to arise in the rest of the lifting system?) and for inspection and thorough examination


(is the load measuring device safe in itself?)


The guidance summarises the


calibration requirements using testing machines that themselves are calibrated to BS EN ISO 376, following BS EN ISO 7500-1 and the testing company’s own ISO 9001-verified procedures (for which the testing company will have comprehensive certification). For hydraulic pressure gauges, BS EN 837-1:1998 is the standard. In both cases, suppliers of devices are required to furnish the relevant certification along with the other required documents, and recalibration is required every 12 months. The requirements for inspection and thorough examination are set by national legislation and/or nationally adopted standards, in this case Leea recommends no longer than six months, although depending on the nature of usage a less frequent scheme is acceptable, but not more than 12 months. Inspection/examination should be in accordance with the manufacturer’s guidance covering all the relevant points that should be checked – visually, dimensionally or otherwise. Manufacturers are also obliged to provide instructions for use, specific to the type and model. These should include not just how the product is intended to be used, but also information on “reasonably foreseeable misuse”, as well as information on what maintenance can be carried out by the operator/duty holder, and what repairs require return to the supplier. Needless to say, all this has to be documented and retailed. This probably sounds more complex


than it really is: LEEA 085 aims to provide a simple guide. To have to inspect, examine and, perhaps separately, recalibrate, may be a tad irksome, but it is the law – and it protects both equipment and life. ●


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81