SPECIAL WORKS
VWT UK provides Ammonia Treatment solution to Wastewater Treatment Works
Veolia Water Technologies UK (VWT UK) has supplied its leading Liquor Treatment Plant (LTP) HYBAS™ ANITA™ Mox technology to help meet the sludge treatment demands at a major Wastewater Treatment Works (WwTW).
The wastewater treatment works, which also includes energy generation facilities, had been recently upgraded to become a specialist sludge treatment centre - receiving sludge from eight other satellite sites in the local area. This sludge is treated using an anaerobic digestion process. The dewatering stage that follows produces liquids with a high ammonia content that need to be treated before being returned to the inlet of the WwTW. The increase in the volume of sludge treated at the site since the upgrade meant an effective new LTP system was required to reduce the ammonia levels and prevent disruption to the wastewater treatment plant.
Following a competitive tender process, VWT UK’s HYBAS™ ANITA™ Mox solution was selected, primarily due to its low total expenditure (TOTEX) requirements and low whole life cost (WLC). Additionally, the comparatively small footprint of the system was an advantage to make the best use of limited space on the site. VWT
60
UK carried out in-depth design work to create a bespoke system based on the requirements of the site.
The HYBAS™ ANITA™ Mox solution can achieve a 90% reduction in ammonia and between 75-85% removal of nitrogen. Therefore, it could achieve the requirements of the site - an 85% reduction in ammonia and an effluent concentration of less than 225 mg/l of ammonia. It also had to have the capacity to treat a design load of 878 kg of nitrogen per day.
The ANITA™ Mox process enables both aerobic nitritation and anoxic ammonia oxidation to take place in a one-stage biofilm process. The ANITA™ Mox Moving Bed Biofilm Reactor (MBBR) treatment process uses suspended high surface area Anox Kaldnes plastic carriers, which are retained within the plant, to provide a large protected surface area for the biofilm and create the optimal conditions for biological activity. It offers a cost effective alternative to the conventional nitrification/ denitrification process as it provides up to 60% savings on aeration costs and does not require the addition of carbon.
| March 2022 |
www.draintraderltd.com
The HYBASTM technology adds integrated fixed-film activated sludge (IFAS) to the ANITA™ Mox process to increase the efficiency. Furthermore, the HYBAS™ ANITA™ Mox system operates most efficiently at around 30•C. Therefore, at this WwTW, heat from the on-site Thermal Hydrolysis Plant (THP) is used to achieve the target temperature and further lower the operational expenditure (OPEX).
In addition, the WwTW benefits from VWT UK’s Hubgrade Performance plant system. This system uses wireless sensors to track and monitor the wastewater characteristics with a sophisticated algorithm-based approach to optimisation maximising the efficiency of the plant for better performance and lower costs.
MBBR plastic biofilm carriers
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84