HEALTHCARE HYGIENE Controlling infection SEKO discusses optimising surface cleaning and chemical storage in healthcare.
For operators in hospitals, care homes and other healthcare settings, preventing and controlling infection is a constant challenge, with outbreaks of bacteria such as MRSA and clostridium difficile placing additional strain on stretched staff and resources.
With cleaning and disinfection routines key to preventing the spread of viruses, a starting point is high-touch surfaces that can harbour bacteria. Although the scale of surface cleaning varies between low-risk (foyers, waiting rooms, offices and corridors) and high-risk areas (operating theatres and intensive care wards), it’s critical that cleaning programme managers do not become complacent.
Examples include chair arms and seats in waiting areas, as well as shared equipment such as keyboards, stethoscopes and ultrasound probes, which are a major cause of cross contamination and must be wiped down regularly with disinfectant.
Meanwhile, call bells, grab rails, door handles and opening buttons/panels are touched countless times each day, and are among the most likely surfaces to transmit infection.
In all toilet areas, from wards to public washrooms to staff facilities, a focus on obvious areas such as toilet bowls, urinals, sinks and floors should not mean that high-touch surfaces including taps, flush handles, dispensers, hand dryers, door handles and locks are neglected.
So how are chemical dilution and dispensing equipment manufacturers helping healthcare managers to minimise risk and protect patients, staff and visitors?
Achieving exceptional surface cleaning standards relies upon chemical dispensers used for dosing concentrated and pre-mixed solutions into sinks, spray bottles, mop buckets and scrubber dryers being capable of combining precision and consistency with robustness and longevity.
In fast-paced, high-pressure environments such as emergency departments where excessive force and accidental collisions are common, a durable, impact- resistant dispenser housing helps to ensure repeatable, reliable performance while reducing the cost of maintenance, repair and replacement.
Budget limitations may make lightweight dispensers an attractive prospect, but while such systems are cheaper per unit, they are also unreliable and commonly offer only a short lifespan, costing more in replacements over the long term compared with higher-quality, longer-lasting equipment.
When it comes to chemical storage, in many cleaning stations it’s common to see concentrated chemical containers such as 20L drums placed unbunded on the floor. As well as causing a potential leakage or trip hazard, this means staff are dosing detergent and other cleaning agents manually, exposing them to potentially harmful concentrated chemical.
34 | TOMORROW'S CLEANING
This can be solved by integrating chemical storage and dilution, allowing operators to not only save space and make cleaning stations tidier and more presentable, but also deliver essential health and safety benefits by keeping chemicals off the floor and avoiding possible spillage and trip hazards.
Such systems typically feature a cabinet-style enclosure where various-sized chemical containers can be stored and connected to the built-in dispenser. Lockable cabinets help to prevent theft and tampering and protect employees against exposure to aggressive concentrated chemicals.
It’s clear that establishing and maintaining exceptional surface cleaning standards in healthcare is achievable with the right investment. Cleaning and hygiene equipment specialist SEKO knows this better than most, as the company has been helping operators for decades with a dedicated range of chemical dilution, dispensing and dosing systems.
These include the modular ProMax dilution system, which allows users to dispense premixed chemical solutions into spray bottles, mop buckets and scrubber dryers, as well as the fully compatible SekureMax and SekureDose storage cabinets.
SEKO’s latest dilution innovation is ProFlex, a dispenser designed with a venturi element that prevents chemicals mixing to ensure cleaning solutions are perfectly proportioned for optimal performance.
www.seko.com
x.com/TomoCleaning
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78
