WHAT’S NEW?
AIM RAISED ACCESS FLOOR BARRIER SYSTEM FACILITATES SERVICES
Installers are often faced with the challenge of maintaining cavity barrier integrity when passing services through raised access floors. AIM – Acoustic & Insulation Manufacturing’s new technical solution combines its Raised Access Floor Barrier (RAFB) with Rockwool Ablative Batts to provide a tested, cost-effective solution.
RAFBs prevent the passage of flame and smoke through underfloor cavities for at least the period of fire rating specified. The AIM RAFB is used to subdivide large uninterrupted cavities, maintain partition fire ratings when aligned under a partition, reduce flanking transmission of sound through underfloor voids and create plenum chambers.
However, passing services, including cable trays and pipes, through the RAFB can compromise the barrier’s vital primary function if not completed in line with the manufacturer’s standard tested details.
Now, AIM provides installers, specifiers, fire consultants and RAF system holders with a solution. When penetration is required to pass services through the AIM RAFB, two Rockwool FirePro Coated Batts, the same height as the underfloor cavity, are placed on either side of the barrier. The services
8
are passed through both the RAFB and ablative batts with any small gaps around the penetrating component filled with Rockwool FirePro Acoustic Sealant, pipe sleeves and pipe closers.
The AIM RAFB is tested to BS EN 1366-4 and the principles of TR31 and can provide up to 120 minutes integrity and insulation. The addition of Rockwool Ablative Batts, to allow services to penetrate the barrier, does not denigrate or reduce the overall fire resistance of the AIM RAFB.
Without this assessment, the installer would need to seek approval from a competent person, such as a fire engineer, to run services through the RAFB or, which is most common, they replace the whole barrier with a full run of Ablative Batt, which is an expensive response.
“The many services required in modern offices are usually run through raised access floors, so must pass through dedicated fire barriers,” explains Ian Exall, AIM’s commercial director. “AIM’s improved technical solution for accommodating services combines our RAFB with Rockwool Ablative Batts. It is tested and cost- effective compared with building the whole fire barrier from an Ablative Batt.”
An additional advantage of AIM’s new solution is that the services do not need to be installed as the barrier is
installed.The Ablative Batt and services can be installed at a later date providing a retrofit solution.
AIM sells the Rockwool Ablative Batt along with the AIM RAFB, but installers can also source the batt from their usual sources.
AIM’s RAFB also reduces airborne transmission of sound by up to 51dB Rw when tested with an access floor system. Made from high density Rockwool stone wool slab faced with impervious foil facing on both sides, it is available cut to size or in slabs for cutting on site.
The AIM RAFB datasheet is available here.
https://www.aimlimited.co.uk/solutions/raised-access-floor-barri- er/?utm_source=press&utm_medium=print&utm_campaign=jul- 25raisedfloorsystem
Part of the Performance Technology Group, UK-based AIM – Acoustic & Insulation Manufacturing has over 30 years of experience in the design, testing and manufacturing of high-quality fire, thermal and acoustic barriers. The company produces a wide variety of bespoke insulation products to customer specification and a range of standard products.
www.aimlimited.co.uk
https://www.aimlimited.co.uk/?utm_source=press&utm_medi- um=print&utm_campaign=jul25raisedfloorsystem
www.tomorrowscontractfloors.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50