SPEED AND AGILITY
BAL introduces BAL Level Fast, a brand-new fast-setting leveller that can be used over rough substrates helping contractors to save time and money on site.
When time is of the essence, new BAL Level Fast gets you tiling sooner.
For small jobs, sometimes you don’t have even three or four hours to wait for levelling compounds to set – that’s where new BAL Level Fast comes to the rescue.
An ultra-quick setting leveller, you can walk on in only 30 minutes and begin tiling just 15 minutes later.
Formulated with BAL’s ground-breaking Fibre Strand Technology (FST) for improved flexibility and resilience, BAL Level Fast can be used from 2-30mm bed depths.
Levellers usually require a minimum of 10mm bed depth over timber floors but BAL Level Fast can be used at only 3mm, saving fixers and contractors considerable time and money. It is also suitable for use with underfloor heating.
BAL Level Fast is engineered to ensure a longer wet edge (10 minutes) and anti-shrinkage technology to provide the perfect substrate for tiling small domestic projects.
A 10-15-minute pot life ensures enough time to mix and use, while self-smoothing and self-healing technology guarantees a perfect, flat surface with no cracks or bowing beneath the tiles.
What’s more, a smooth ‘one-pour’ formulation provides excellent flow – and crucially no need for spike rolling – makes for ease and speed of installation.
BAL Level Fast keeps the edge for rough terrain and is suitable for most surfaces including sand/cement screeds, overlaid timber, tongue and groove floorboard, single layer ply, tile adhesive residues, existing unglazed tiles or natural stone. It can also go over mastic asphalt, tile backer boards and anhydrite/calcium sulfate screeds.
Alex Underwood, Head of Marketing and Customer Services at BAL said: “Where exceptionally fast-set levelling is required, then look no further than new BAL Level Fast with FST technology.
“Often when a fixer is expecting the floor to be ready for tiling, but arrives to uneven substrates that are not planned into the project timing, BAL Level Fast will still allow a the fast completion that was anticipated.
“Perfect for small domestic projects, it is exceptionally quick drying – you can walk on it from just 30 minutes and begin fixing in 45 minutes – its unique technology gives you 10 minutes to pour and mix your next bag whilst still ensuring a smooth, seamless finish.
“BAL Level Fast exceeds BS EN 13813 CT – C30 – F7 and has been engineered with anti-shrinkage technology meaning it won’t bow or crack during the rapid-hardening process.
“An exceptional flow rate makes for smooth and easy installation.”
twitter.com/TContractFloors
Protein free, BAL Level Fast is available in 20kg bags. While it is suitable for some small commercial projects, it isn’t pumpable, so for larger projects BAL still recommends BAL Level Max.
www.bal-adhesives.com LEVELLING COMPOUNDS | 21
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50
