INNOVATIVE ADHESIVE TE MOST DEMANDING OF EN Introducing temperature
tolerant Styccobond F48 & Styccobond F49
Styccobond F48PLUS
Styccobond F48 Plus, from F Ball and Co. Ltd, is a fibre- reinforced, solvent free adhesive with a high resistance to both heat and PVC plasticisers making it suitable for use in conservatories and areas where floor-to-ceiling windows are installed.
It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.
Styccobond F48 Plus can be used for securing a wide range of plasticised PVC and rubber floorcoverings in both sheet and tile form.
It can be applied to structurally sound, smooth, dry subfloors such as concrete and sand/cement screed, plywood and hardboard.
It is also designed to work perfectly with Stopgap Smoothing underlayments
Styccobond F48PLUS
• Fibre-reinforced • High resistance to heat • Fast drying - install floorcoverings from 5 minutes • Excellent grab • Slide resistant • Solvent free
Styccobond F49 Hybrid PS
Styccobond F49 Hybrid PS is a temperature tolerant, water-based pressure sensitive adhesive that can be used for installing vinyl floorcoverings; skirting, coving and capping; PVC edging and PVC backed textile floor or wall coverings.
PLUS
It is designed for use in conservatories, areas where floor-to-ceiling windows are installed and other areas where floorcoverings have to be tolerant of extreme temperature variations.
Styccobond F49 Hybrid PS gives a strong initial tack and high bond strength.
The mixing of the two unique components maximises the high strength of the adhesive and makes it suitable for use in demanding environments where temperatures can fluctuate between -20o
C and +60o C, in accordance with floorcovering manufacturers’ recommendations.
It is protected against bio-degradation and is suitable for use over normal under floor heating systems.
Styccobond F49 HYBRID PS provides an extremely strong water resistant bond enabling application in areas subject to water or high humidity when used in conjunction with a suitable Stopgap smoothing underlayment.
Outstanding plasticiser resistance ensures it can be used for securing highly plasticised flooring accessories and trims. The high bond strength ensures optimum dimensional stability throughout the lifetime of the installation.
It can be applied to structually sound, smooth, dry subfloors such concrete and sand/cement screed, calcium sulphate and plywood.
It is also been designed to work perfectly with Stopgap smoothing underlayments.
Styccobond F49 Hybrid PS has been tested to the standards of the International Maritime Organisation and approved for use in marine flooring installations.
Tel: 01538 361 633 • email:
mail@f-ball.co.uk • web:
www.f-ball.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
